Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LUVOSINT X92A-1 - TPU - LEHVOSS Group

Material Data Center offers the following functions for LUVOSINT X92A-1:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Luvosint datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Otras propiedades - 3D Data
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Indice de fluidez volumétrico, MVR 18 cm³/10min ISO 1133
Temperatura 190 °C -
Carga 2.16 kg -
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Dureza Shore A 88 - ISO 7619-1
Other Standards[S]
Módulo de flexión, 23°C 27 MPa ISO 6721-1
Modulo de Flexión 72 MPa ISO 6721-1
Modulo de Flexión - Temperatura 60 °C -
S: These properties are reported by the producer according standards that are different to our defaults.
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Temperatura de fusión, 10°C/min 160 °C ISO 11357-1/-3
Temp. reblandecimiento Vicat, A 90 °C ISO 306
Other Standards[S]
Temp. de transición vítrea, 10°C/min -13.6 °C ISO 6721-1
S: These properties are reported by the producer according standards that are different to our defaults.
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1200 kg/m³ ISO 1183
Bulk density 457 kg/m³ -
3D DataValorUnidadesMétodo de ensayo
Other Standards[S]
Esfuerzo de tracción, flat 20[1] MPa DIN 53504
Esfuerzo de tracción, upright 15[2] MPa DIN 53504
Alargamiento a rotura, flat 520[1] % DIN 53504
Alargamiento a rotura, upright 500[2] % DIN 53504
1: XY-direction  2: ZX-direction  S: These properties are reported by the producer according standards that are different to our defaults.
Características
Procesamiento y forma de entrega
Additive Manufacturing, Sinterizado por láser
Forma de suministro
Polvo, Color natural
Applicaciones
Equipos deportivos
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.