Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of MAGNUM™ 8391 - ABS - Trinseo

Material Data Center offers the following functions for MAGNUM™ 8391:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Magnum datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Índice de fluidez, MFI 28 g/10min ISO 1133
Temperatura 220 °C -
Carga 10 kg -
Contracción posterior al moldeo, paralelo 0.6 % ISO 294-4, 2577
ASTM Data
Índice de fluidez, MFI 8 g/10min ASTM D 1238
Temperatura 230 °C -
Carga 3.8 kg -
Contracción posterior al moldeo, paralelo 0.0055 mm/mm ASTM D 955
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 2340 MPa ISO 527
Esfuerzo de fluencia 45 MPa ISO 527
Alarg. en límite elástico 2.5 % ISO 527
Módulo de flexión, 23°C 2400 MPa ISO 178
Resistencia al impacto Charpy c/entalla, +23°C 19 kJ/m² ISO 179/1eA
Resistencia al impacto Charpy c/entalla, -30°C 9 kJ/m² ISO 179/1eA
Resistencia al impacto Izod con entalla, +23°C 19 kJ/m² ISO 180/1A
Resistencia al impacto Izod con entalla 9 kJ/m² ISO 180/1A
Temperatura -30 °C -
ASTM Data
Esfuerzo de fluencia a tracción 48 MPa ASTM D 638
Esfuerzo de fractura a tracción 35 MPa ASTM D 638
Alargamiento a la fluencia 2.7 % ASTM D 638
Alargamiento a la rotura 8.7 % ASTM D 638
Módulo de flexión 2482 MPa ASTM D 790
Resistencia a la flexión 75.2 MPa ASTM D 790
Dureza Rockwell R108 - ASTM D 785
Resistencia al impacto Izod con entalla, 1/8 in 235 J/m ASTM D 256
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Temp. reblandecimiento Vicat, B 95 °C ISO 306
Combustibilidad a 1.5mm esp. nom. HB class IEC 60695-11-10
Espesores de probeta 1.5 mm -
Combustibilidad a espesor h HB class IEC 60695-11-10
Espesores de probeta 3.0 mm -
ASTM Data
Combustibilidad UL 94 HB - UL 94
Espesores de probeta 1.5 mm -
Estabilidad al calor @ 66 psi 87.2 °C ASTM D 648
Estabilidad al calor @ 264 psi 73.9 °C ASTM D 648
Temperatura Vicat 98.9 °C ASTM D 1525
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1050 kg/m³ ISO 1183
Densidad 1050 kg/m³ ASTM D 792
Características
Procesamiento y forma de entrega
Moldeo por inyección
Características
Estabilidad de color
Disponibilidad regional
Norteamérica
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.