Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Makroblend® UT305 - (PC+PET) - Covestro Deutschland AG

Material Data Center offers the following functions for Makroblend® UT305:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Makroblend datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Texto del producto
  • (PC PET)-blend, easy release, injection molding. Makroblend UT305 offers high heat resistance, good chemical resistance and flowability. Molded parts from UT305 provide a good surface appearance and exceptional dimensional stability, even in high moisture environments.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Indice de fluidez volumétrico, MVR 39 cm³/10min ISO 1133
Temperatura 270 °C -
Carga 5 kg -
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 2600 MPa ISO 527
Esfuerzo de fluencia 69 MPa ISO 527
Alarg. en límite elástico 5.4 % ISO 527
Alarg. nominal a rotura >50 % ISO 527
Resistencia al impacto Charpy, +23°C N kJ/m² ISO 179/1eU
Resistencia al impacto Charpy, -30°C N kJ/m² ISO 179/1eU
Resistencia al impacto Charpy c/entalla, +23°C 8 kJ/m² ISO 179/1eA
Resistencia al impacto Charpy c/entalla, -30°C 6 kJ/m² ISO 179/1eA
Perforación - máxima fuerza, +23°C 4600 N ISO 6603-2
Perforación - máxima fuerza, -30°C 5800 N ISO 6603-2
Perforación - energía, +23°C 54 J ISO 6603-2
Perforación - energía, -30°C 62 J ISO 6603-2
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Estabilidad al calor, 1.80 MPa 109 °C ISO 75-1/-2
Estabilidad al calor, 0.45 MPa 128 °C ISO 75-1/-2
Coef.de expansión térmica lineal, paralelo 70 E-6/K ISO 11359-1/-2
Coef.de expansión térmica lineal, normal 70 E-6/K ISO 11359-1/-2
Combustibilidad a 1.5mm esp. nom. HB class IEC 60695-11-10
Espesores de probeta 1.5 mm -
Otras propiedadesValorUnidadesMétodo de ensayo
Absorción de agua 0.55 % Sim. to ISO 62
Absorción de humedad 0.25 % Sim. to ISO 62
Densidad 1240 kg/m³ ISO 1183
Condiciones de transformaciónValorUnidadesMétodo de ensayo
ISO Data
Moldeo por inyección, temperatura de la masa 270 °C ISO 294
Moldeo por inyección, temperatura del molde 70 °C ISO 294
Moldeo por inyección, velocidad de inyección 200 mm/s ISO 294
Recomendación para procesamiento Moldeo por inyecciónValorUnidadesMétodo de ensayo
Temperatura de pre-secado 110 °C -
Tiempo de pre-secado 2 - 4 h -
Humedad de procesamiento ≤0.01 % -
Temperatura de la masa 260 - 280 °C -
Temperatura del molde 60 - 80 °C -
Características
Procesamiento y forma de entrega
Moldeo por inyección
Forma de suministro
Sémola
Aditivos
Desmoldeante
Resistencia quimica
Resistencia química general
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa
Demás información
Moldeo por inyección
PREPROCESSING
Max. Water content: 0.01 %
Drying temperature: 110 °C
Drying time:
Circulating air drying oven (50 % fresh air) 4-12 h
Fresh air dryer (high speed dryer) 2-4 h
Dry air dryer 2-4 h

PROCESSING
Melt temperature: 260-280 °C
Mold temperature: 60-80 °C

Use open nozzle.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.