Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Marlex HMN® TR-945 - (PE-HD) - Chevron Phillips Chemical Co. LP

Material Data Center offers the following functions for Marlex HMN® TR-945:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Marlex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ASTM Data
Índice de fluidez, MFI 6 g/10min ASTM D 1238
Temperatura 190 °C -
Carga 2.16 kg -
Propiedades mecánicasValorUnidadesMétodo de ensayo
ASTM Data
Esfuerzo de fluencia a tracción 20 MPa ASTM D 638
Alargamiento a la rotura 460 % ASTM D 638
Módulo de flexión 910.1 MPa ASTM D 790
Dureza D Shore 63 - ASTM D 2240
Propiedades térmicasValorUnidadesMétodo de ensayo
ASTM Data
Estabilidad al calor @ 66 psi 63.9 °C ASTM D 648
Estabilidad al calor @ 264 psi 43.9 °C ASTM D 648
Temperatura de fusión 130 °C ASTM D 3418
Temperatura Vicat 118 °C ASTM D 1525
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 945 kg/m³ ASTM D 792
Características
Procesamiento y forma de entrega
Moldeo rotacional
Forma de suministro
Sémola
Características especiales
Alto impacto o modificado al impacto, Estable contra rayos U.V./interperie
Características
Bajo olor, Copolímero, Copolímero de hexeno
Resistencia quimica
Resistencia al esfuerzo producido por condiciones ambientales
Certifications
Contacto con alimentos, Aprobado por el FDA 21 CFR
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.