Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Meplen EH T10 V2 - PP-T10 - Mepol S.r.l.

Material Data Center offers the following functions for Meplen EH T10 V2:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Meplen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Índice de fluidez, MFI 12 g/10min ISO 1133
Temperatura 230 °C -
Carga 2.16 kg -
Contracción posterior al moldeo, paralelo 1.0 % ISO 294-4, 2577
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Esfuerzo de fluencia 35 MPa ISO 527
Alargamiento a rotura 30 % ISO 527
Módulo de flexión, 23°C 1500 MPa ISO 178
Resistencia al impacto Izod con entalla, +23°C 3.5 kJ/m² ISO 180/1A
Resistencia al impacto Izod con entalla 3 kJ/m² ISO 180/1A
Temperatura 0 °C -
Dureza Shore D 75 - ISO 7619-1
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Temperatura de fusión, 10°C/min 165 °C ISO 11357-1/-3
Estabilidad al calor, 1.80 MPa 64 °C ISO 75-1/-2
Estabilidad al calor, 0.45 MPa 125 °C ISO 75-1/-2
Temp. reblandecimiento Vicat, A 150 °C ISO 306
Temp. reblandecimiento Vicat, B 96 °C ISO 306
Combustibilidad a espesor h V-2 class IEC 60695-11-10
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 990 kg/m³ ISO 1183
Características
Características especiales
Antiestático, Resistencia mejorada al fuego, Estable contra rayos U.V./interperie, Estable contra el calor
Características
Homopolímero
Disponibilidad regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.