Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Moplen EP548P - PP - PolyMirae

Material Data Center offers the following functions for Moplen EP548P:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Moplen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Índice de fluidez, MFI 16 g/10min ISO 1133
Temperatura 230 °C -
ASTM Data
Índice de fluidez, MFI 16 g/10min ASTM D 1238
Temperatura 230 °C -
Carga 2.16 kg -
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 1550 MPa ISO 527
Resistencia al impacto Charpy, +23°C N kJ/m² ISO 179/1eU
Resistencia al impacto Charpy c/entalla, +23°C 6.5 kJ/m² ISO 179/1eA
ASTM Data
Módulo de flexión 1472 MPa ASTM D 790
Resistencia al impacto Izod con entalla, 1/8 in 151 J/m ASTM D 256
Resistencia al impacto Izod con entalla, baja temperatura 56.7 J/m ASTM D 256
Temperatura -20 °C -
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Estabilidad al calor, 0.45 MPa 90 °C ISO 75-1/-2
ASTM Data
Estabilidad al calor @ 66 psi 120 °C ASTM D 648
Temperatura Vicat 147 °C ASTM D 1525
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 900 kg/m³ ISO 1183
Densidad 900 kg/m³ ASTM D 792
Características
Procesamiento y forma de entrega
Moldeo por inyección
Características especiales
Antiestático
Características
Nucleado, Copolímero
Certifications
Contacto con alimentos, Aprobado por el FDA 21 CFR
Applicaciones
Empacado
Disponibilidad regional
Asia Pacifico, Próximo Oriente/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.