Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Mosten® GB 005 - PP - ORLEN Unipetrol RPA s.r.o.

Material Data Center offers the following functions for Mosten® GB 005:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Mosten datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Índice de fluidez, MFI 5 g/10min ISO 1133
Temperatura 230 °C -
Carga 2.16 kg -
Contracción posterior al moldeo, paralelo 1.8 % ISO 294-4, 2577
Contracción posterior al moldeo, normal 2.0 % ISO 294-4, 2577
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 1500 MPa ISO 527
Esfuerzo de fluencia 34 MPa ISO 527
Alarg. en límite elástico 9 % ISO 527
Alargamiento a rotura >50 % ISO 527
Módulo de flexión, 23°C 1600 MPa ISO 178
Módulo de plastodeformación, 1h 1000 MPa ISO 899-1
Módulo de plastodeformación, 1000h 400 MPa ISO 899-1
Resistencia al impacto Charpy c/entalla, +23°C 4 kJ/m² ISO 179/1eA
Dureza Shore D 65 - ISO 7619-1
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Temperatura de fusión, 10°C/min 170 °C ISO 11357-1/-3
Estabilidad al calor, 1.80 MPa 55 °C ISO 75-1/-2
Características
Procesamiento y forma de entrega
Moldeo por inyección, Termoconformación
Forma de suministro
Sémola, Color natural
Características
Homopolímero
Resistencia quimica
Resistencia química general
Certifications
Contacto con alimentos, Aprovação de alimentos 1935/2004/EG, Aprobación a contacto con alimentos 10/2011
Applicaciones
Uso general
Disponibilidad regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.