Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Pebax® 7033 SP 01 - TPA - ARKEMA

Check here, which other Pebax datasheets, application examples or technical articles are available in Material Data Center

Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Otras propiedades - Funciones

Any use of this information falls under the rules of our disclaimer.

Texto del producto

Polyether block amide Pebax® 7033 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
This SP grade has been developed to be heat and UV resistant.


Main applications:

• Athletic foot wear components
• Ski shoes
• Tennis racket bumpers
• Zip fasteners

Packaging:
This grade is delivered dried in sealed packaging (20 or 25 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services.

Propiedades mecánicas	Seco / Cond	Unidades	Método de ensayo
ISO Data
Módulo de tracción	414 / 384	MPa	ISO 527
Esfuerzo de fluencia	23 / 22	MPa	ISO 527
Alarg. en límite elástico	22 / 20	%	ISO 527
Alarg. nominal a rotura	>50 / >50	%	ISO 527
Resistencia al impacto Charpy c/entalla, +23°C	- / 120	kJ/m²	ISO 179/1eA
Resistencia al impacto Charpy c/entalla, -30°C	- / 20	kJ/m²	ISO 179/1eA
Tensión a 10% alargamiento	22 / *	MPa	ISO 527
Tensión a 100% alargamiento	21 / *	MPa	ISO 527
Resistencia a la tracción TPE	54 / *	MPa	ISO 527
Alargamiento a rotura TPE	>300 / *	%	ISO 527
Resistencia al desgarro	149 / *	kN/m	ISO 34-1
Dureza Shore D	61 / *	-	ISO 7619-1

Propiedades térmicas	Seco / Cond	Unidades	Método de ensayo
ISO Data
Temperatura de fusión, 10°C/min	172 / *	°C	ISO 11357-1/-3
Estabilidad al calor, 0.45 MPa	99 / *	°C	ISO 75-1/-2
Temp. reblandecimiento Vicat, B	106 / *	°C	ISO 306
Coef.de expansión térmica lineal, paralelo	160 / *	E-6/K	ISO 11359-1/-2

Propiedades eléctricas	Seco / Cond	Unidades	Método de ensayo
ISO Data
Resistividad superficial específica	* / 4E13	Ohm	IEC 62631-3-2
Indice comparativo de linea de fuga	* / 600	-	IEC 60112

Otras propiedades	Seco / Cond	Unidades	Método de ensayo
Absorción de agua	1.1 / *	%	Sim. to ISO 62
Absorción de humedad	0.7 / *	%	Sim. to ISO 62
Densidad	1010 / -	kg/m³	ISO 1183

Funciones

Características

Procesamiento y forma de entrega

Moldeo por inyección, Extrusion del film, Extrusión de perfiles, Otros tipos de extrusión, Transfer Molding, Colado, Termoconformación

Forma de suministro

Sémola

Características especiales

Galvanizable, Estable a la luz, Estable contra rayos U.V./interperie, Estable contra el calor

Disponibilidad regional

Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa

Demás información

Moldeo por inyección

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 230°C / 260°C / 290°C
- Typical mold temperature : 25 – 60°C
- Drying time and temperature (only necessary for bags opened for more than two hours) : 5-7 hours at 70-80°C

Otros tipos de extrusión

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 220°C / 235°C / 250°C.
- Drying time and temperature (only necessary for bags opened for more than two hours) : 5-7 hours at 70-80°C.

Resistencia a medios químicos

Acidos
	Ácido sulfúrico (38% por masa) (23°C)
Bases
	Solución de hidróxido de sodio (1% por masa) (23°C)
Alcoholes
	Etanol (23°C)
Hidrocarburos
	Iso-octano (23°C)
Cetonas
	Acetona (23°C)
Soluciones de sal
	Solución de cloruro de cinc (50% por masa) (23°C)
Otros
	Agua (23°C)

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.