Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Platamid® M 1186 Pellets - PA* - ARKEMA

Material Data Center offers the following functions for Platamid® M 1186 Pellets:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Platamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades térmicas
Any use of this information falls under the rules of our disclaimer.
Texto del producto

Platamid® M 1186 Pellets

Copolyamide Hot Melt Adhesive /Extrusion Applications

 

Platamid® M 1186 is a standard thermoplastic copolyamide hot-melt adhesive available in pellet form. This low to medium melt viscosity grade is particularly suitable for manufacturing webs, nets, mono- and multi-filaments, and films by extrusion.

Platamid® M 1186 Pellets offers a very good adhesion to various polar substrates (thermoplastics, thermosets, metal, natural fibers, etc.). This product is resistant against steam sterilization.



AVAILABLE GRADES

This grade is available:

- dried (M 1186 TA)

- undried (M 1186 FA)

PACKAGING

Platamid® M 1186  TA and Platamid® M 1186  FA are delivered in 25 kg sealed bags.

This grade is ready to be processed.

 

SHELFLIFE

Two years from the date of delivery. For any use above this limit, please refer to our technical services.

Caracteristicas de procesamiento y fisicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Indice de fluidez volumétrico, MVR 19 / * cm³/10min ISO 1133
Temperatura 230 / * °C -
Carga 2.16 / * kg -
Propiedades térmicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Temperatura de fusión, 10°C/min 145 / * °C ISO 11357-1/-3
Características
Procesamiento y forma de entrega
Extrusion del film
Forma de suministro
Sémola
Características especiales
Esterilizable, Esterilización por vapor
Características
Buenas propiedades de adhesión, Copolímero
Applicaciones
Monofilamento, Filamentos multiple
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.