Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of RAMAPET N2 - PET - Indorama Ventures PCL

Material Data Center offers the following functions for RAMAPET N2:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ramapet datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propiedades térmicas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Texto del producto
For more detailed information, please read our brochure p. 46 to 54
or contact our representatives in your region.
Propiedades térmicasValorUnidadesMétodo de ensayo
Other Standards[S]
Temperatura de fusión, 10°C/min 247 °C
S: These properties are reported by the producer according standards that are different to our defaults.
Otras propiedadesValorUnidadesMétodo de ensayo
Viscosidad intrínseca 0.76 dl/g -
Acetaldehído 1 ppm -
Color b -1.5 - CIE
Crystallinity 50 % -
Moisture Content 0.2 % -
Características
Procesamiento y forma de entrega
Moldeo por inyección
Características especiales
Transparente
Características
Copolímero
Resistencia quimica
Resistencia al aceite
Certifications
Contacto con alimentos, Aprobación a contacto con alimentos 10/2011, Aprobado por el FDA 21 CFR, RoHS
Applicaciones
Empacado
Disponibilidad regional
Europa, Asia Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.