Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Riblene® FF 20 - (PE-LD) - Versalis S.p.A

Material Data Center offers the following functions for Riblene® FF 20:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Riblene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades térmicas - Propiedades opticas - Otras propiedades - Propiedades mecánicas (Film)
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Índice de fluidez, MFI 0.8 g/10min ISO 1133
Temperatura 190 °C -
Carga 2.16 kg -
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Temperatura de fusión, 10°C/min 112 °C ISO 11357-1/-3
Coef.de expansión térmica lineal, paralelo 25 E-6/K ISO 11359-1/-2
Propiedades opticasValorUnidadesMétodo de ensayo
ISO Data
Brillo, 45° 62 - ISO 2813
Niebla 8 - ISO 14782
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 921 kg/m³ ISO 1183
Propiedades mecánicas (Film)ValorUnidadesMétodo de ensayo
ISO Data
Tensión a fluencia, paralelo 10 MPa ISO 527-3
Tensión a fluencia, normal 11 MPa ISO 527-3
Resistencia a la tracción, normal 22 MPa ISO 527-3
Alargamiento máximo, paralelo 450 % ISO 527-3
Alargamiento máximo, normal 650 % ISO 527-3
Coeficiente dinámico de fricción 0.5 - ISO 8295
Tipo de extrusión soplado - -
Espesor de la muestra 0.07 mm -
Características
Procesamiento y forma de entrega
Extrusión de película soplada
Forma de suministro
Sémola
Características
Resistencia del fundido
Applicaciones
Empacado
Disponibilidad regional
Europa, Próximo Oriente/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.