Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsan® BES BLACK PR - PA11 - ARKEMA

Material Data Center offers the following functions for Rilsan® BES BLACK PR:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Rilsan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propiedades mecánicas - Propiedades térmicas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Texto del producto
PA11-P, EHL, 22-005
Rilsan® BES BLACK PR resin is a polyamide 11 produced from a renewable source. This black grade is plasticized and designed for extrusion.

Main applications:
  • Fluid transportation
  • Tubing for use in motor vehicle


Packaging:
This grade is delivered dried in sealed packaging (25 kg bags,44 lb bags, 1000 lb rigid containers) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services.
Propiedades mecánicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Esfuerzo de fluencia - / 27 MPa ISO 527
Alarg. en límite elástico - / 32 % ISO 527
Alarg. nominal a rotura - / >50 % ISO 527
Resistencia al impacto Charpy c/entalla, -30°C - / 10 kJ/m² ISO 179/1eA
Dureza Shore D 63 / * - ISO 7619-1
Propiedades térmicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Temperatura de fusión, 10°C/min 182 / * °C ISO 11357-1/-3
Otras propiedadesSeco / CondUnidadesMétodo de ensayo
Densidad 1050 / 1050 kg/m³ ISO 1183
Características
Procesamiento y forma de entrega
Extrusión de perfiles, Otros tipos de extrusión
Forma de suministro
Sémola, Negro
Certifications
Contiene recursos renovables
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa
Demás información
Otros tipos de extrusión

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 230°C / 250°C / 280°C.

- Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 80-90°C.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.