Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Starflam M10009A - PP - Eurostar Engineering Plastics

Material Data Center offers the following functions for Starflam M10009A:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Starflam datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Indice de fluidez volumétrico, MVR 10 cm³/10min ISO 1133
Temperatura 230 °C -
Carga 5 kg -
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Esfuerzo de fluencia 38 MPa ISO 527
Alarg. en límite elástico 7.3 % ISO 527
Resistencia a la tracción 25 MPa ISO 527
Módulo de flexión, 23°C 1900 MPa ISO 178
Resistencia al impacto Izod, +23°C 45 kJ/m² ISO 180/1U
Resistencia al impacto Izod con entalla, +23°C 4 kJ/m² ISO 180/1A
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Estabilidad al calor, 1.80 MPa 57 °C ISO 75-1/-2
Estabilidad al calor, 0.45 MPa 103 °C ISO 75-1/-2
Coef.de expansión térmica lineal, paralelo 106 E-6/K ISO 11359-1/-2
Coef.de expansión térmica lineal, normal 140 E-6/K ISO 11359-1/-2
ASTM Data
Combustibilidad UL 94 V-2 - UL 94
Espesores de probeta 1.6 mm -
Otras propiedadesValorUnidadesMétodo de ensayo
Absorción de agua 0.01 % Sim. to ISO 62
Densidad 1000 kg/m³ ISO 1183
Características
Procesamiento y forma de entrega
Moldeo por inyección
Características especiales
Resistencia mejorada al fuego
Características
Homopolímero
Disponibilidad regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.