Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Starflam PZ0052E - PA6-GF - Eurostar Engineering Plastics

Material Data Center offers the following functions for Starflam PZ0052E:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Starflam datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propiedades mecánicas - Propiedades térmicas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 6100 MPa ISO 527
Resistencia a la tracción 82 MPa ISO 527
Alargamiento a rotura 2.5 % ISO 527
Módulo de flexión, 23°C 5200 MPa ISO 178
Resistencia al impacto Izod, +23°C 25 kJ/m² ISO 180/1U
Resistencia al impacto Izod con entalla, +23°C 3 kJ/m² ISO 180/1A
ASTM Data
Módulo de tracción 7440 MPa ASTM D 638
Esfuerzo de fractura a tracción 103 MPa ASTM D 638
Alargamiento a la rotura 2.3 % ASTM D 638
Módulo de flexión 7100 MPa ASTM D 790
Resistencia al impacto Izod con entalla, 1/8 in 53 J/m ASTM D 256
Resistencia al impacto Izod, 1/8 in 469 J/m ASTM D 256
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Estabilidad al calor, 1.80 MPa 137 °C ISO 75-1/-2
Combustibilidad según índice de oxigeno 20 % ISO 4589-1/-2
ASTM Data
Combustibilidad UL 94 V-2 - UL 94
Espesores de probeta 0.75 mm -
Coeficiente de dilatación térmica, long. 32 E-6/K ASTM D 696
Estabilidad al calor @ 66 psi 215 °C ASTM D 648
Estabilidad al calor @ 264 psi 204 °C ASTM D 648
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1380 kg/m³ ISO 1183
Absorción de agua, 24hr 1.05 % ASTM D 570
Densidad 1380 kg/m³ ASTM D 792
Características
Procesamiento y forma de entrega
Moldeo por inyección, Otros tipos de extrusión
Forma de suministro
Sémola
Características especiales
Resistencia mejorada al fuego
Características
Bajo olor
Disponibilidad regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.