Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SUPREME SM 510 - SMMA - Supreme Petrochem Ltd

Material Data Center offers the following functions for SUPREME SM 510:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Supreme datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades opticas - Otras propiedades - Recomendación para procesamiento Moldeo por inyección
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ASTM Data
Índice de fluidez, MFI 1.7 g/10min ASTM D 1238
Temperatura 200 °C -
Carga 5 kg -
Contracción posterior al moldeo, paralelo 0.004 mm/mm ASTM D 955
Propiedades mecánicasValorUnidadesMétodo de ensayo
ASTM Data
Esfuerzo de tracción 72 MPa ASTM D 638
Módulo de flexión 3400 MPa ASTM D 790
Resistencia a la flexión 110 MPa ASTM D 790
Propiedades térmicasValorUnidadesMétodo de ensayo
ASTM Data
Combustibilidad UL 94 HB - UL 94
Espesores de probeta 1.5 mm -
Estabilidad al calor @ 264 psi 88 °C ASTM D 648
Temperatura Vicat 104 °C ASTM D 1525
Propiedades opticasValorUnidadesMétodo de ensayo
ASTM Data
Opacidad 0.3 % ASTM D 1003
Transmitancia luminosa 92.5 % ASTM D 1003
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1110 kg/m³ ASTM D 792
Recomendación para procesamiento Moldeo por inyecciónValorUnidadesMétodo de ensayo
Temperatura de pre-secado 60 - 80 °C -
Tiempo de pre-secado 3 h -
Temperatura de la masa 180 - 240 °C -
Temperatura del molde 35 - 60 °C -
Características
Procesamiento y forma de entrega
Moldeo por inyección, Extrusión de perfiles, Extrusión de láminas, Otros tipos de extrusión
Características especiales
Transparente
Características
High Gloss, Resistente a rayado
Certifications
RoHS
Applicaciones
IT / Equipo de oficina
Disponibilidad regional
Próximo Oriente/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.