Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Taroblend 86 - (PC+ABS) - Taro Plast S.p.A.

Material Data Center offers the following functions for Taroblend 86:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Taroblend datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Índice de fluidez, MFI 16 g/10min ISO 1133
Temperatura 260 °C -
Carga 5 kg -
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 2200 MPa ISO 527
Esfuerzo de fluencia 55 MPa ISO 527
Alargamiento a rotura >50 % ISO 527
Módulo de flexión, 23°C 2200 MPa ISO 178
Resistencia al impacto Charpy, +23°C N kJ/m² ISO 179/1eU
Resistencia al impacto Charpy c/entalla, +23°C 32 kJ/m² ISO 179/1eA
ASTM Data
Resistencia al impacto Izod con entalla, 1/8 in 550 J/m ASTM D 256
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Estabilidad al calor, 1.80 MPa 120 °C ISO 75-1/-2
Temp. reblandecimiento Vicat, A 140 °C ISO 306
Temp. reblandecimiento Vicat, B 135 °C ISO 306
Coef.de expansión térmica lineal, paralelo 65 E-6/K ISO 11359-1/-2
ASTM Data
Combustibilidad UL 94 HB - UL 94
Espesores de probeta 1.6 mm -
Índice de oxigeno límite 24 % ASTM D 2863
Propiedades eléctricasValorUnidadesMétodo de ensayo
ISO Data
Resistividad volumétrica específica 1E13 Ohm*m IEC 62631-3-1
Resistencia dieléctrica 24 kV/mm IEC 60243-1
Indice comparativo de linea de fuga 240 - IEC 60112
Otras propiedadesValorUnidadesMétodo de ensayo
Absorción de agua 0.4 % Sim. to ISO 62
Densidad 1150 kg/m³ ISO 1183
Características
Características especiales
Estable contra rayos U.V./interperie
Características
Bajo olor, Estabilidad térmica
Applicaciones
Automotriz, Electrica
Disponibilidad regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.