Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Teflon™ PFA 345 - PFA - The Chemours Company

Material Data Center offers the following functions for Teflon™ PFA 345:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Teflon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
Other Standards[S]
Índice de fluidez, MFI 5 g/10min ASTM D 3307
S: These properties are reported by the producer according standards that are different to our defaults.
Propiedades mecánicasValorUnidadesMétodo de ensayo
ASTM Data
Módulo de flexión 551 MPa ASTM D 790
Dureza D Shore 55 - ASTM D 2240
Other Standards[S]
Esfuerzo de tracción 27 MPa ASTM D 3307
Alargamiento a la rotura 300 % ASTM D 3307
S: These properties are reported by the producer according standards that are different to our defaults.
Propiedades térmicasValorUnidadesMétodo de ensayo
ASTM Data
Combustibilidad UL 94 V-0 - UL 94
Índice de oxigeno límite 95 % ASTM D 2863
Other Standards[S]
Temperatura de fusión 305 °C ASTM D 4591
Temperatura maxima de servicio, continua 260 °C -
S: These properties are reported by the producer according standards that are different to our defaults.
Propiedades eléctricasValorUnidadesMétodo de ensayo
ASTM Data
Resistencia dieléctrica, tiempo corto 80 kV/mm ASTM D 149
Factor de pérdidas dieléctricas, 1 MHz 0.0002 - ASTM D 150
Constante dieléctrica, 1 MHz 2.03 - ASTM D 150
Resistividad volumétrica 1E18 Ohm*cm ASTM D 257
Otras propiedadesValorUnidadesMétodo de ensayo
Absorción de agua, 24hr 0.03 % ASTM D 570
Densidad 2150 kg/m³ ASTM D 792
Características
Procesamiento y forma de entrega
Moldeo por inyección, Extrusión de tubería, Extrusión de cable, Otros tipos de extrusión, Transfer Molding, Moldeo por compresión
Forma de suministro
Sémola
Características especiales
Estable contra rayos U.V./interperie, Estable contra el calor
Características
Resistencia a la fluencia, Buen estiramiento, Bajo humo, Resistencia del fundido, Estabilidad térmica, Grado tribológico
Resistencia quimica
Resistencia química general, Resistencia al esfuerzo producido por condiciones ambientales
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.