Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultraform® S2320 003 PRO TR - POM - BASF

Material Data Center offers the following functions for Ultraform® S2320 003 PRO TR:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultraform datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Indice de fluidez volumétrico, MVR 13 cm³/10min ISO 1133
Temperatura 190 °C -
Carga 2.16 kg -
Contracción posterior al moldeo, paralelo 2.2 % ISO 294-4, 2577
Contracción posterior al moldeo, normal 2.0 % ISO 294-4, 2577
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 2600 MPa ISO 527
Esfuerzo de fluencia 62 MPa ISO 527
Alarg. en límite elástico 9 % ISO 527
Alarg. nominal a rotura 35 % ISO 527
Resistencia al impacto Charpy, +23°C 180 kJ/m² ISO 179/1eU
Resistencia al impacto Charpy, -30°C 145 kJ/m² ISO 179/1eU
Resistencia al impacto Charpy c/entalla, +23°C 5.5 kJ/m² ISO 179/1eA
Resistencia al impacto Charpy c/entalla, -30°C 6 kJ/m² ISO 179/1eA
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Temperatura de fusión, 10°C/min 167 °C ISO 11357-1/-3
Estabilidad al calor, 1.80 MPa 100 °C ISO 75-1/-2
Coef.de expansión térmica lineal, paralelo 120 E-6/K ISO 11359-1/-2
Otras propiedadesValorUnidadesMétodo de ensayo
Absorción de agua 0.8 % Sim. to ISO 62
Absorción de humedad 0.2 % Sim. to ISO 62
Densidad 1400 kg/m³ ISO 1183
Recomendación para procesamiento Moldeo por inyecciónValorUnidadesMétodo de ensayo
Temperatura de pre-secado 100 °C -
Tiempo de pre-secado 3 h -
Humedad de procesamiento ≤0.2 % -
Temperatura de la masa 190 - 230 °C -
Temperatura del molde 60 - 120 °C -
Características
Procesamiento y forma de entrega
Moldeo por inyección
Forma de suministro
Sémola
Características especiales
Esterilización por óxido de etileno (EtO), Esterilización por vapor
Certifications
Contacto con alimentos, Aprobación a contacto con alimentos 10/2011, Aprobado por el FDA 21 CFR, Grado médico, USP Class VI
Applicaciones
Médico
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.