Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Vampamid 66 3530 V0 P - PA66-GF35 - VAMP TECH SPA

Material Data Center offers the following functions for Vampamid 66 3530 V0 P:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Vampamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Otras propiedades - Recomendación para procesamiento Moldeo por inyección
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ASTM Data
Contracción posterior al moldeo, paralelo 0.005 mm/mm ASTM D 955
Contracción posterior al moldeo, normal 0.008 mm/mm ASTM D 955
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Resistencia al impacto Izod, +23°C 50 kJ/m² ISO 180/1U
Resistencia al impacto Izod con entalla, +23°C 8 kJ/m² ISO 180/1A
ASTM Data
Módulo de tracción 11500 MPa ASTM D 638
Esfuerzo de fluencia a tracción 155 MPa ASTM D 638
Alargamiento a la rotura 2 % ASTM D 638
Módulo de flexión 11000 MPa ASTM D 790
Resistencia a la flexión 230 MPa ASTM D 790
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Combustibilidad a 1.5mm esp. nom. V-0 class IEC 60695-11-10
Espesores de probeta 1.6 mm -
Combustibilidad a espesor h V-0 class IEC 60695-11-10
Espesores de probeta 0.8 mm -
ASTM Data
Estabilidad al calor @ 264 psi 245 °C ASTM D 648
Temperatura Vicat 245 °C ASTM D 1525
Propiedades eléctricasValorUnidadesMétodo de ensayo
ISO Data
Indice comparativo de linea de fuga 500 - IEC 60112
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1440 kg/m³ ASTM D 792
Recomendación para procesamiento Moldeo por inyecciónValorUnidadesMétodo de ensayo
Temperatura de pre-secado 90 °C -
Tiempo de pre-secado 3 h -
Temperatura de la masa 275 °C -
Temperatura del molde 90 °C -
Características
Procesamiento y forma de entrega
Moldeo por inyección
Características especiales
Resistencia mejorada al fuego
Certifications
RoHS
Disponibilidad regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.