Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Vampcarb 0023 V0 - PC - VAMP TECH SPA

Material Data Center offers the following functions for Vampcarb 0023 V0:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Vampcarb datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Otras propiedades - Recomendación para procesamiento Moldeo por inyección
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ASTM Data
Contracción posterior al moldeo, paralelo 0.0065 mm/mm ASTM D 955
Contracción posterior al moldeo, normal 0.0065 mm/mm ASTM D 955
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Resistencia al impacto Izod, +23°C N kJ/m² ISO 180/1U
Resistencia al impacto Izod con entalla, +23°C 50 kJ/m² ISO 180/1A
ASTM Data
Módulo de tracción 2400 MPa ASTM D 638
Esfuerzo de fluencia a tracción 50 MPa ASTM D 638
Alargamiento a la rotura 50 % ASTM D 638
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Combustibilidad a 1.5mm esp. nom. V-0 class IEC 60695-11-10
Espesores de probeta 1.6 mm -
Combustibilidad a espesor h V-0 class IEC 60695-11-10
Espesores de probeta 3.2 mm -
ASTM Data
Estabilidad al calor @ 264 psi 120 °C ASTM D 648
Temperatura Vicat 140 °C ASTM D 1525
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1210 kg/m³ ASTM D 792
Recomendación para procesamiento Moldeo por inyecciónValorUnidadesMétodo de ensayo
Temperatura de pre-secado 90 °C -
Tiempo de pre-secado 3 h -
Temperatura de la masa 280 °C -
Temperatura del molde 70 °C -
Características
Procesamiento y forma de entrega
Moldeo por inyección
Características especiales
Resistencia mejorada al fuego, Transparente
Características
Amorfo
Certifications
RoHS
Disponibilidad regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.