Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VECTRA® E150i - LCP-GF50 - Celanese

Check here, which other Vectra datasheets, application examples or technical articles are available in Material Data Center

Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Otras propiedades - Funciones

Any use of this information falls under the rules of our disclaimer.

Texto del producto

Easy flowing grade with very good heat resistance, and mechanical properties. May reduce warpage in some parts compared to E130i. 50% glass reinforced. Chemical abbreviation according to ISO 1043-1 : LCP Inherently flame retardant FDA compliant UL-Listing V-0 in natural and black at 0.43mm thickness per UL 94 flame testing. Relative-Temperature-Index (RTI) according to UL 746B: electricals 240°C, mechanicals 240°C at 0.75mm. UL = Underwriters Laboratories (USA)

Flammability @1.6mm nom. thickn.	V-0	-
Flammability at thickness h (0.43 mm)	V-0	UL recognition (h)

Caracteristicas de procesamiento y fisicas	Valor	Unidades	Método de ensayo
ISO Data
Contracción posterior al moldeo, paralelo	0.2	%	ISO 294-4, 2577
Contracción posterior al moldeo, normal	0.5	%	ISO 294-4, 2577

Propiedades mecánicas	Valor	Unidades	Método de ensayo
ISO Data
Módulo de tracción	20000	MPa	ISO 527
Resistencia a la tracción	130	MPa	ISO 527
Alargamiento a rotura	1	%	ISO 527
Resistencia al impacto Charpy, +23°C	19	kJ/m²	ISO 179/1eU
Resistencia al impacto Charpy c/entalla, +23°C	10	kJ/m²	ISO 179/1eA

Propiedades térmicas	Valor	Unidades	Método de ensayo
ISO Data
Temperatura de fusión, 10°C/min	335	°C	ISO 11357-1/-3
Estabilidad al calor, 1.80 MPa	260	°C	ISO 75-1/-2
Estabilidad al calor, 8.00 MPa	225	°C	ISO 75-1/-2
Temp. reblandecimiento Vicat, B	200	°C	ISO 306
Coef.de expansión térmica lineal, paralelo	6	E-6/K	ISO 11359-1/-2
Coef.de expansión térmica lineal, normal	17	E-6/K	ISO 11359-1/-2
Combustibilidad a 1.5mm esp. nom.	V-0	class	IEC 60695-11-10
Espesores de probeta	1.5	mm	-
Combustibilidad a espesor h	V-0	class	IEC 60695-11-10
Espesores de probeta	0.4	mm	-
Yellow Card disponible	sí	-	-

Propiedades eléctricas	Valor	Unidades	Método de ensayo
ISO Data
Constante dieléctrica, 1MHz	4.7	-	IEC 62631-2-1
Factor de pérdidas dieléctricas, 1MHz	280	E-4	IEC 62631-2-1
Resistividad volumétrica específica	1E13	Ohm*m	IEC 62631-3-1
Resistividad superficial específica	1E14	Ohm	IEC 62631-3-2
Resistencia dieléctrica	28	kV/mm	IEC 60243-1

Otras propiedades	Valor	Unidades	Método de ensayo
Absorción de humedad	0.006	%	Sim. to ISO 62
Densidad	1810	kg/m³	ISO 1183

Funciones

Características

Forma de suministro

Negro, Color natural

Características especiales

Resistencia mejorada al fuego, Estable contra el calor

Características

Baja deformación

Certifications

Contacto con alimentos, Aprobado por el FDA 21 CFR

Disponibilidad regional

Norteamérica, Europa, Asia Pacifico

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.