Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESPEL® TP-8311 - PI - DuPont Engineering Polymers

Material Data Center offers the following functions for VESPEL® TP-8311:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Vespel datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propiedades mecánicas - Propiedades térmicas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Propiedades mecánicasValorUnidadesMétodo de ensayo
ASTM Data
Esfuerzo de tracción 151 MPa ASTM D 638
Alargamiento a la rotura 4 % ASTM D 638
Resistencia de compresión 44 MPa ASTM D 695
Resistencia a la flexión 215 MPa ASTM D 790
Resistencia al impacto Izod con entalla, 1/8 in 92 J/m ASTM D 256
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Combustibilidad a 1.5mm esp. nom. V-0 class IEC 60695-11-10
Espesores de probeta 1.5 mm -
Combustibilidad a espesor h V-0 class IEC 60695-11-10
Espesores de probeta 0.8 mm -
ASTM Data
Combustibilidad UL 94 V-0 - UL 94
Espesores de probeta 1.5 mm -
Coeficiente de dilatación térmica, long. 17 E-6/K ASTM D 696
Coeficiente de dilatación térmica, normal 50 E-6/K ASTM D 696
Estabilidad al calor @ 264 psi 244 °C ASTM D 648
Temperatura de transición vítrea 249 °C ASTM E 1356
Otras propiedadesValorUnidadesMétodo de ensayo
Absorción de agua, 24hr 0.11 % ASTM D 570
Densidad 1380 kg/m³ ASTM D 792
Características
Forma de suministro
Color natural
Aditivos
Lubricante
Características especiales
Resistencia mejorada al fuego, Estable contra el calor
Características
Grado tribológico, Soldable
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.