Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAKEEP® i4 3DF - PEEK - Evonik Operations GmbH

Material Data Center offers the following functions for VESTAKEEP® i4 3DF:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vestakeep datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Indice de fluidez volumétrico, MVR 12 / * cm³/10min ISO 1133
Temperatura 380 / * °C -
Carga 5 / * kg -
Propiedades mecánicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 3500 / - MPa ISO 527
Esfuerzo de tracción 94 / - MPa ISO 527
Esfuerzo de fluencia 94 / - MPa ISO 527
Alarg. en límite elástico 5 / - % ISO 527
Resistencia a la tracción 76 / - MPa ISO 527
Resistencia al impacto Charpy, +23°C N / - kJ/m² ISO 179/1eU
Resistencia al impacto Charpy, -30°C N / - kJ/m² ISO 179/1eU
Resistencia al impacto Charpy c/entalla, +23°C 6 / - kJ/m² ISO 179/1eA
Type of failure C / - - -
Resistencia al impacto Charpy c/entalla, -30°C 9.1 / - kJ/m² ISO 179/1eA
Type of failure C / - - -
Propiedades térmicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Temperatura de fusión, 10°C/min 338 / * °C ISO 11357-1/-3
Temp. de transición vítrea, 10°C/min 152 / * °C ISO 11357-1/-2
Estabilidad al calor, 1.80 MPa 150 / * °C ISO 75-1/-2
Estabilidad al calor, 0.45 MPa 205 / * °C ISO 75-1/-2
Temp. reblandecimiento Vicat, A 335 / * °C ISO 306
Temp. reblandecimiento Vicat, B 305 / * °C ISO 306
Combustibilidad a espesor h V-0 / * class IEC 60695-11-10
Espesores de probeta 3.2 / * mm -
ASTM Data
Temperatura de fusión 338 °C ASTM D 3418
Otras propiedadesSeco / CondUnidadesMétodo de ensayo
Densidad 1300 / - kg/m³ ISO 1183
Densidad 1300 kg/m³ ASTM D 792
Características
Procesamiento y forma de entrega
Additive Manufacturing
Forma de suministro
Monofilamento, Color natural
Características especiales
Estable contra el calor
Características
Estabilidad térmica
Resistencia quimica
Resistencia al ácido, Resistencia alcalinica, Resistencia química general, Resistencia a solventes, Resistencia a la grasa, Estabilidad hidrolitica, Resistencia al aceite
Certifications
Grado médico, Biocompatibility ISO 10993, USP Class VI
Applicaciones
Médico
Disponibilidad regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.