Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAMID® LX9112 BK - PA12 - Evonik Operations GmbH

Material Data Center offers the following functions for VESTAMID® LX9112 BK:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vestamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Texto del producto
Conductive, heat-stabilized and light-resistant polyamide 12 compound for the extrusion coating of steel tubing

VESTAMID® LX9112 BK is a heat-stabilized, conductive polyamide 12 compound, especially developed for the pore-free extrusion coating of steel tubing.
 
Compared to commonly use conductive extrusion compounds VESTAMID® LX9112 BK is distinguished by a significant lower melt viscosity and respectively by outstanding extrusion characteristics even in very thin coatings.
 
Steel tubing coated with VESTAMID® LX9112 BK meet the requirements of the US automotive industry to prevent electrostatic charge caused by flowing liquid fuels.

Due to the excellent impact strength and the  good abrasion and chemical resistance of polyamide 12 the seamless coating with VESTAMID® LX9112 BK improves the corrosion resistance of steel tubing significantly.
 
VESTAMID® LX9112 BK is supplied as cylindrical pellets, ready for processing in moisture-proof packaging.


Pigmentation may affect values.

Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30°C.

For information about processing of VESTAMID®, please follow the general commendations about “Processing of VESTAMID® compounds”. 

FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM
OR VISIT OUR PRODUCT AT  WWW.VESTAMID.COM

Caracteristicas de procesamiento y fisicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Indice de fluidez volumétrico, MVR 34 / * cm³/10min ISO 1133
Temperatura 240 / * °C -
Carga 10 / * kg -
Contracción posterior al moldeo, paralelo 1.2 / * % ISO 294-4, 2577
Contracción posterior al moldeo, normal 1.5 / * % ISO 294-4, 2577
Propiedades mecánicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 2120 / 1690 MPa ISO 527
Esfuerzo de fluencia 54 / 48 MPa ISO 527
Alarg. en límite elástico 4 / 13 % ISO 527
Alarg. nominal a rotura 32 / >50 % ISO 527
Resistencia al impacto Charpy, +23°C N / N kJ/m² ISO 179/1eU
Resistencia al impacto Charpy, -30°C N / N kJ/m² ISO 179/1eU
Resistencia al impacto Charpy c/entalla, +23°C 4 / 3 kJ/m² ISO 179/1eA
Type of failure C / C - -
Resistencia al impacto Charpy c/entalla, -30°C 3 / 3 kJ/m² ISO 179/1eA
Type of failure C / C - -
Propiedades térmicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Temperatura de fusión, 10°C/min 176 / * °C ISO 11357-1/-3
Temp. de transición vítrea, 10°C/min 44 / * °C ISO 11357-1/-2
Estabilidad al calor, 1.80 MPa 52 / * °C ISO 75-1/-2
Estabilidad al calor, 0.45 MPa 150 / * °C ISO 75-1/-2
Temp. reblandecimiento Vicat, B 156 / * °C ISO 306
Coef.de expansión térmica lineal, paralelo 105 / * E-6/K ISO 11359-1/-2
Coef.de expansión térmica lineal, normal 124 / * E-6/K ISO 11359-1/-2
Propiedades eléctricasSeco / CondUnidadesMétodo de ensayo
ISO Data
Resistividad volumétrica específica 43000 / 29000 Ohm*m IEC 62631-3-1
Otras propiedadesSeco / CondUnidadesMétodo de ensayo
Absorción de agua 1.11 / * % Sim. to ISO 62
Absorción de humedad 0.65 / * % Sim. to ISO 62
Densidad 1120 / - kg/m³ ISO 1183
Características
Procesamiento y forma de entrega
Otros tipos de extrusión, Recubrimiento
Forma de suministro
Sémola, Negro
Características especiales
Conductividad eléctrica aumentada, Antiestático, Alto impacto o modificado al impacto, Estable a la luz, Estable contra el calor
Resistencia quimica
Resistencia química general
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.