Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAMID® L-GF50 BK 9.7506 - PA12-GF50 - Evonik Operations GmbH

Material Data Center offers the following functions for VESTAMID® L-GF50 BK 9.7506:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vestamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Texto del producto
Medium-viscosity, heat-stabilized glass fiber-reinforced polyamide 12  compound

VESTAMID® L-GF50 BK 9.7506 is a 50% glass fiber-reinforced, easily demoldable and heat-stabilized polyamide 12 compound.

Due to its mold release properties, VESTAMID® L-GF50 BK 9.7506 is suitable for the efficient production of injection molded parts with short cycle times.

Further advantages of VESTAMID® L-GF50 BK 9.7506 are the characteristic properties of polyamide 12 as low water absorption, good dimensional stability and almost the same properties at changing ambient humidity.
  
VESTAMID® L-GF50 BK 9.7506 is supplied as cylindrical granules, ready for processing, in moisture-proof bags.
   
Pigmentation may affect values.

Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30°C.

For information about processing of VESTAMID®, please follow the general commendations about “Processing of VESTAMID® compounds”. 

FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM
OR VISIT OUR PRODUCT AT  WWW.VESTAMID.COM
Caracteristicas de procesamiento y fisicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Indice de fluidez volumétrico, MVR 9 / * cm³/10min ISO 1133
Temperatura 275 / * °C -
Carga 2.16 / * kg -
Contracción posterior al moldeo, paralelo 0.2 / * % ISO 294-4, 2577
Contracción posterior al moldeo, normal 0.7 / * % ISO 294-4, 2577
Propiedades mecánicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 12000 / - MPa ISO 527
Esfuerzo de fluencia 150 / - MPa ISO 527
Alarg. en límite elástico 4 / - % ISO 527
Alarg. nominal a rotura 4.5 / - % ISO 527
Resistencia al impacto Charpy, +23°C 90 / - kJ/m² ISO 179/1eU
Type of failure C / - - -
Resistencia al impacto Charpy, -30°C 90 / - kJ/m² ISO 179/1eU
Type of failure C / - - -
Resistencia al impacto Charpy c/entalla, +23°C 25 / - kJ/m² ISO 179/1eA
Type of failure C / - - -
Resistencia al impacto Charpy c/entalla, -30°C 17 / - kJ/m² ISO 179/1eA
Type of failure C / - - -
Propiedades térmicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Temperatura de fusión, 10°C/min 177 / * °C ISO 11357-1/-3
Temp. de transición vítrea, 10°C/min 41 / * °C ISO 11357-1/-2
Estabilidad al calor, 1.80 MPa 172 / * °C ISO 75-1/-2
Estabilidad al calor, 0.45 MPa 179 / * °C ISO 75-1/-2
Temp. reblandecimiento Vicat, B 175 / * °C ISO 306
Coef.de expansión térmica lineal, paralelo 14 / * E-6/K ISO 11359-1/-2
Coef.de expansión térmica lineal, normal 131 / * E-6/K ISO 11359-1/-2
Combustibilidad a 1.5mm esp. nom. HB / * class IEC 60695-11-10
Espesores de probeta 1.6 / * mm -
Combustibilidad a espesor h HB / * class IEC 60695-11-10
Espesores de probeta 0.8 / * mm -
Propiedades eléctricasSeco / CondUnidadesMétodo de ensayo
ISO Data
Constante dieléctrica, 100Hz 4.9 / - - IEC 62631-2-1
Constante dieléctrica, 1MHz 3.8 / - - IEC 62631-2-1
Factor de pérdidas dieléctricas, 100Hz 510 / - E-4 IEC 62631-2-1
Factor de pérdidas dieléctricas, 1MHz 320 / - E-4 IEC 62631-2-1
Resistividad volumétrica específica 1E12 / - Ohm*m IEC 62631-3-1
Resistencia dieléctrica 33 / - kV/mm IEC 60243-1
Indice comparativo de linea de fuga 600 / - - IEC 60112
Otras propiedadesSeco / CondUnidadesMétodo de ensayo
Absorción de agua 0.83 / * % Sim. to ISO 62
Absorción de humedad 0.44 / * % Sim. to ISO 62
Densidad 1450 / - kg/m³ ISO 1183
Características
Procesamiento y forma de entrega
Moldeo por inyección
Forma de suministro
Sémola, Negro
Aditivos
Desmoldeante
Características especiales
Estable contra el calor
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.