Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTODUR® X4877 NC - PBT-I-GF30 - Evonik Operations GmbH

Material Data Center offers the following functions for VESTODUR® X4877 NC:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, parameters for material models, CAE Interfaces

Check here, which other Vestodur datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Otras propiedades - Funciones
Any use of this information falls under the rules of our disclaimer.
Texto del producto

Easy-flow, glass fiber-reinforced polybutylene terephthalate compound with increased impact strength

VESTODUR® X4877 is an easy-flow, glass  fiber-reinforced (30%) polybutylene tereph­thalate compound (PBT) with increased impact strength for injection molding.

 

This compound is especially suitable for the manufacture of parts which are subjected to  high mechanical and thermal loads. Compared with commonly used glass fiber-reinforced

PBT compounds with a similar stiffness VESTODUR® X4877 has an increased impact strength and also a higher strain at break.

 

VESTODUR® X4877 is supplied as cylindrical pellets in polyethylene packaging.

 

For further information about processing of VESTODUR® X4877, please follow the general recommendations in our brochure "VESTODUR® Handling and Processing".

 

Pigmentation may affect values.
 

Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30°C.


FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM 
OR VISIT OUR PRODUCT AT WWW.VESTODUR.COM

Caracteristicas de procesamiento y fisicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Indice de fluidez volumétrico, MVR 20 / * cm³/10min ISO 1133
Temperatura 250 / * °C -
Carga 2.16 / * kg -
Contracción posterior al moldeo, paralelo 0.3 / * % ISO 294-4, 2577
Contracción posterior al moldeo, normal 1.0 / * % ISO 294-4, 2577
Propiedades mecánicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 5200 / - MPa ISO 527
Resistencia a la tracción 100 / - MPa ISO 527
Alargamiento a rotura 5.5 / - % ISO 527
Módulo de plastodeformación, 1h * / 5200 MPa ISO 899-1
Módulo de plastodeformación, 1000h * / 4500 MPa ISO 899-1
Resistencia al impacto Charpy, +23°C 80 / - kJ/m² ISO 179/1eU
Type of failure C / - - -
Resistencia al impacto Charpy c/entalla, +23°C 16 / - kJ/m² ISO 179/1eA
Type of failure C / - - -
Resistencia al impacto Charpy c/entalla, -30°C 13 / - kJ/m² ISO 179/1eA
Type of failure C / - - -
Dureza Shore D 79 / * - ISO 7619-1
Propiedades térmicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Temperatura de fusión, 10°C/min 200 / * °C ISO 11357-1/-3
Estabilidad al calor, 1.80 MPa 175 / * °C ISO 75-1/-2
Estabilidad al calor, 0.45 MPa 195 / * °C ISO 75-1/-2
Temp. reblandecimiento Vicat, B 165 / * °C ISO 306
Coef.de expansión térmica lineal, paralelo 50 / * E-6/K ISO 11359-1/-2
Combustibilidad a 1.5mm esp. nom. HB / * class IEC 60695-11-10
Espesores de probeta 1.6 / * mm -
Combustibilidad a espesor h HB / * class IEC 60695-11-10
Espesores de probeta 0.8 / * mm -
Propiedades eléctricasSeco / CondUnidadesMétodo de ensayo
ISO Data
Constante dieléctrica, 100Hz 4.7 / - - IEC 62631-2-1
Factor de pérdidas dieléctricas, 100Hz 200 / - E-4 IEC 62631-2-1
Resistividad volumétrica específica 1E12 / - Ohm*m IEC 62631-3-1
Resistividad superficial específica * / 1E13 Ohm IEC 62631-3-2
Indice comparativo de linea de fuga 600 / - - IEC 60112
Otras propiedadesSeco / CondUnidadesMétodo de ensayo
Absorción de agua 0.25 / * % Sim. to ISO 62
Densidad 1490 / - kg/m³ ISO 1183
Funciones
Módulo de cizallamiento dinámico-temperatura , VESTODUR® X4877 NC (Seco), PBT-I-GF30, Evonik
Volumen especifico-temperatura (pvT) , VESTODUR® X4877 NC, PBT-I-GF30, Evonik
Características
Procesamiento y forma de entrega
Moldeo por inyección
Forma de suministro
Sémola, Color natural
Aditivos
Lubricante, Desmoldeante
Características especiales
Alto impacto o modificado al impacto, Estable contra el calor
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa
Resistencia a medios químicos
Acidos
Ácido acético (5% por masa) (23°C)
Solución ácido cítrico (10% por masa) (23°C)
Ácido clorhídrico (36% por masa) (23°C)
Ácido nítrico (40% por masa) (23°C)
Ácido sulfúrico (38% por masa) (23°C)
Ácido sulfúrico (5% por masa) (23°C)
Bases
Solución de hidróxido de amónio (10% por masa) (23°C)
Alcoholes
Alcohol isopropílico (23°C)
Metanol (23°C)
Etanol (23°C)
Hidrocarburos
Iso-octano (23°C)
Cetonas
Acetona (23°C)
Éteres
Dietil éter (23°C)
Aceites minerales
SAE 10w40 aceite motor multigrado (23°C)
Aceite aislante (23°C)
Combustibles normales
Combustible normal sin alcohol (pref. ISO 1817 líquido C) (23°C)
Combustible diesel (pref. ISO 1817 líquido F) (23°C)
Soluciones de sal
Solución de cloruro de sodio (10% por masa) (23°C)
Solución de hipoclorito de sodio (10% por masa) (23°C)
Solución de carbonato sódico (20% por masa) (23°C)
Otros
Acetato etílico (23°C)
Agua oxigenada (23°C)
Agua (23°C)
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.