Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Vistamaxx™ 3000 - TPO - ExxonMobil Chemical

Material Data Center offers the following functions for Vistamaxx™ 3000:
unit conversion, PDF datasheet print

Check here, which other Vistamaxx datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ASTM Data
Índice de fluidez, MFI 3.7 g/10min ASTM D 1238
Temperatura 190 °C -
Carga 2.16 kg -
Propiedades mecánicasValorUnidadesMétodo de ensayo
Other Standards[S]
Esfuerzo de fluencia a tracción 5.24 MPa ExxonMobil Method
Esfuerzo de fractura a tracción 13.8 MPa ExxonMobil Method
Alargamiento a la fluencia 40 % ExxonMobil Method
Alargamiento a la rotura 800 % ExxonMobil Method
Módulo en 100% alargamiento 4.69 MPa ExxonMobil Method
Módulo en 300% alargamiento 1.61 MPa ExxonMobil Method
Dureza D Shore 27 - ExxonMobil Method
Resistencia al desgarro 63.9 kN/m ExxonMobil Method
S: These properties are reported by the producer according standards that are different to our defaults.
Propiedades térmicasValorUnidadesMétodo de ensayo
Other Standards[S]
Temperatura Vicat 65 °C ExxonMobil Method
S: These properties are reported by the producer according standards that are different to our defaults.
Otras propiedadesValorUnidadesMétodo de ensayo
Other Standards[S]
Densidad 873 kg/m³ ExxonMobil Method
S: These properties are reported by the producer according standards that are different to our defaults.
Características
Procesamiento y forma de entrega
Moldeo por inyección, Extrusión de película soplada, Extrusion del film, Extrusión de láminas, Calandrado
Forma de suministro
Sémola
Características
Resina de mezcla, Buenas propiedades de adhesión, Sellado en caliente
Resistencia quimica
Resistencia química general
Certifications
RoHS
Applicaciones
Empacado
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.