Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Zylar® 670 - MBS - INEOS Styrolution

Material Data Center offers the following functions for Zylar® 670:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Zylar datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades opticas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Indice de fluidez volumétrico, MVR 6 cm³/10min ISO 1133
Temperatura 200 °C -
Carga 5 kg -
Contracción posterior al moldeo, paralelo 0.4 % ISO 294-4, 2577
ASTM Data
Índice de fluidez, MFI 6 g/10min ASTM D 1238
Temperatura 200 °C -
Carga 5 kg -
Contracción posterior al moldeo, paralelo 0.004 mm/mm ASTM D 955
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 1800 MPa ISO 527
Esfuerzo de fluencia 28 MPa ISO 527
Módulo de flexión, 23°C 1800 MPa ISO 178
ASTM Data
Módulo de tracción 1827 MPa ASTM D 638
Esfuerzo de fluencia a tracción 27.6 MPa ASTM D 638
Alargamiento a la rotura 42 % ASTM D 638
Módulo de flexión 1827 MPa ASTM D 790
Resistencia a la flexión 41.4 MPa ASTM D 790
Dureza Rockwell M 70 - ASTM D 785
Gardner impacto 7.91 J ASTM D 2794,4226,5420
Resistencia al impacto Izod con entalla, 1/8 in 107 J/m ASTM D 256
Propiedades térmicasValorUnidadesMétodo de ensayo
ASTM Data
Temperatura Vicat 97.8 °C ASTM D 1525
Propiedades opticasValorUnidadesMétodo de ensayo
ASTM Data
Opacidad 2 % ASTM D 1003
Transmitancia luminosa 91 % ASTM D 1003
Índice de refracción 1.56 - ASTM D 542
Otras propiedadesValorUnidadesMétodo de ensayo
Absorción de agua 0.1 % Sim. to ISO 62
Absorción de humedad 0.05 % Sim. to ISO 62
Densidad 1010 kg/m³ ISO 1183
Absorción de agua, equilibrio 0.1 % ASTM D 570
Densidad 1050 kg/m³ ASTM D 792
Características
Procesamiento y forma de entrega
Moldeo por inyección
Características especiales
Alto impacto o modificado al impacto, Esterilizable, Esterilización por óxido de etileno (EtO), Gamma irradiation sterilization
Características
Copolímero
Resistencia quimica
Resistencia a la radiacion
Certifications
Contacto con alimentos, Aprobación a contacto con alimentos 10/2011, Aprobado por el FDA 21 CFR, Grado médico, Biocompatibility ISO 10993, USP Class VI, Drug Master File, Long term supply assurance
Applicaciones
Médico
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.