Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Adsyl 6 C 30 F - PP - LyondellBasell Industries

Material Data Center offers the following functions for Adsyl 6 C 30 F:
unit conversion, PDF datasheet print

Check here, which other Adsyl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades térmicas - Propiedades opticas - Otras propiedades - Propiedades mecánicas (Film)
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Índice de fluidez, MFI 5.5 g/10min ISO 1133
Temperatura 230 °C -
Carga 2.16 kg -
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Temperatura de fusión, 10°C/min 128 °C ISO 11357-1/-3
Estabilidad al calor, 0.45 MPa 59 °C ISO 75-1/-2
Temp. reblandecimiento Vicat, A 103 °C ISO 306
Propiedades opticasValorUnidadesMétodo de ensayo
ASTM Data
Brillo 92 - ASTM D 2457
Opacidad 0.2 % ASTM D 1003
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 900 kg/m³ ISO 1183
Propiedades mecánicas (Film)ValorUnidadesMétodo de ensayo
ISO Data
Módulo de tracción, paralelo 260 MPa ISO 527-3
Módulo de tracción, normal 250 MPa ISO 527-3
Tensión a fluencia, paralelo 14 MPa ISO 527-3
Tensión a fluencia, normal 14 MPa ISO 527-3
Alargamiento a fluencia, paralelo 16 % ISO 527-3
Alargamiento a fluencia, normal 14 % ISO 527-3
Resistencia a la tracción, paralelo 37 MPa ISO 527-3
Resistencia a la tracción, normal 41 MPa ISO 527-3
Alargamiento máximo, paralelo 850 % ISO 527-3
Alargamiento máximo, normal 900 % ISO 527-3
Tipo de extrusión colada - -
Espesor de la muestra 0.05 mm -
Características
Procesamiento y forma de entrega
Extrusion del film
Características
Sellado en caliente
Certifications
Contacto con alimentos, Aprovação de alimentos 1935/2004/EG, Aprobación a contacto con alimentos 10/2011, Aprobado por el FDA 21 CFR
Applicaciones
Empacado
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.