Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Amilan® CM2001 - PA610 - Toray Industries, Inc.

Material Data Center offers the following functions for Amilan® CM2001:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Amilan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Conductibilidad termica de fusión 0.25 W/(m K) -
Calor especifico de la masa 1900 J/(kg K) -
Propiedades mecánicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Esfuerzo de tracción 55 / 40 MPa ISO 527
Alargamiento a rotura 50 / 50 % ISO 527
Módulo de flexión, 23°C 2000 / 900 MPa ISO 178
Modulo de Flexión 500 / - MPa ISO 178
Modulo de Flexión - Temperatura 80 °C -
Resistencia al impacto Charpy c/entalla, +23°C 40 / - kJ/m² ISO 179/1eA
Dureza Rockwell R 116 - ISO 2039-2
Propiedades térmicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Temperatura de fusión, 10°C/min 225 / * °C ISO 11357-1/-3
Estabilidad al calor, 0.45 MPa 180 / * °C ISO 75-1/-2
Coef.de expansión térmica lineal, paralelo 120 / * E-6/K ISO 11359-1/-2
Propiedades eléctricasSeco / CondUnidadesMétodo de ensayo
ISO Data
Constante dieléctrica, 1MHz 3.1 / - - IEC 62631-2-1
Factor de pérdidas dieléctricas, 1MHz 200 / - E-4 IEC 62631-2-1
Resistividad volumétrica específica 1E12 / - Ohm*m IEC 62631-3-1
Otras propiedadesSeco / CondUnidadesMétodo de ensayo
Absorción de agua 4 / * % Sim. to ISO 62
Densidad 1080 / - kg/m³ ISO 1183
Características
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.