Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Baystar™ MDPE HL 323 - (PE-MD) - Bayport Polymers LLC

Material Data Center offers the following functions for Baystar™ MDPE HL 323:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Baystar datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades térmicas - Otras propiedades - Propiedades mecánicas (Film) - Recomendación para procesamiento Extrusión
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ASTM Data
Índice de fluidez, MFI 0.23 g/10min ASTM D 1238
Temperatura 190 °C -
Carga 2.16 kg -
Propiedades térmicasValorUnidadesMétodo de ensayo
ASTM Data
Temperatura de fusión 126 °C ASTM D 3418
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 937 kg/m³ ASTM D 792
Propiedades mecánicas (Film)ValorUnidadesMétodo de ensayo
ASTM Data
Esfuerzo de fluencia a tracción, long. 12.4 MPa ASTM D 882
Esfuerzo de fluencia a tracción, normal 19.3 MPa ASTM D 882
Esfuerzo de fractura a tracción, long. 57.2 MPa ASTM D 882
Esfuerzo de fractura a tracción, normal 36.5 MPa ASTM D 882
Alargamiento a la rotura, long. 500 % ASTM D 882
Alargamiento a la rotura, normal 900 % ASTM D 882
Tipo de extrusión soplado - -
Espesor de la muestra 0.0254 mm -
Recomendación para procesamiento ExtrusiónValorUnidadesMétodo de ensayo
Temperatura de la masa 193 - 216 °C -
Características
Procesamiento y forma de entrega
Extrusion del film
Applicaciones
Empacado
Disponibilidad regional
Norteamérica
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.