Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of CALIBRE™ 5101-15 - PC-GX10 - Trinseo

Material Data Center offers the following functions for CALIBRE™ 5101-15:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Calibre datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Índice de fluidez, MFI 15 g/10min ISO 1133
Temperatura 300 °C -
Carga 1.2 kg -
Contracción posterior al moldeo, paralelo 0.3 % ISO 294-4, 2577
ASTM Data
Índice de fluidez, MFI 15 g/10min ASTM D 1238
Temperatura 300 °C -
Carga 1.2 kg -
Contracción posterior al moldeo, paralelo 0.0035 mm/mm ASTM D 955
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 3380 MPa ISO 527
Esfuerzo de fluencia 62 MPa ISO 527
Resistencia a la tracción 61 MPa ISO 527
Alargamiento a rotura 6 % ISO 527
Módulo de flexión, 23°C 3170 MPa ISO 178
Resistencia al impacto Izod, +23°C 29 kJ/m² ISO 180/1U
ASTM Data
Módulo de tracción 3378 MPa ASTM D 638
Esfuerzo de fluencia a tracción 62.1 MPa ASTM D 638
Esfuerzo de fractura a tracción 60.7 MPa ASTM D 638
Alargamiento a la rotura 6 % ASTM D 638
Módulo de flexión 3172 MPa ASTM D 790
Resistencia a la flexión 93.8 MPa ASTM D 790
Dureza Rockwell R 122 - ASTM D 785
Resistencia al impacto Izod con entalla, 1/8 in 80.1 J/m ASTM D 256
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Estabilidad al calor, 1.80 MPa 134 °C ISO 75-1/-2
Temp. reblandecimiento Vicat, B 160 °C ISO 306
Combustibilidad a 1.5mm esp. nom. V-2 class IEC 60695-11-10
Espesores de probeta 1.6 mm -
Combustibilidad a espesor h V-0 class IEC 60695-11-10
Espesores de probeta 3.2 mm -
Combustibilidad según índice de oxigeno 32 % ISO 4589-1/-2
ASTM Data
Combustibilidad UL 94 V-2 - UL 94
Espesores de probeta 1.59 mm -
Coeficiente de dilatación térmica, long. 37.8 E-6/K ASTM D 696
Estabilidad al calor @ 264 psi 134 °C ASTM D 648
Temperatura Vicat 160 °C ASTM D 1525
Otras propiedadesValorUnidadesMétodo de ensayo
Absorción de humedad 0.25 % Sim. to ISO 62
Densidad 1270 kg/m³ ISO 1183
Absorción de agua, 24hr 0.15 % ASTM D 570
Absorción de agua, equilibrio 0.25 % ASTM D 570
Densidad 1270 kg/m³ ASTM D 792
Características
Aditivos
Desmoldeante
Características especiales
Estable contra el calor
Applicaciones
IT / Equipo de oficina, Médico
Disponibilidad regional
Norteamérica, América del Sur y Centroaméric
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.