View Datasheet in other language

E-mail to a friend

Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Durabio™ D5360 - PC - Mitsubishi Chemical Performance Polymers

Material Data Center offers the following functions for Durabio™ D5360:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Durabio datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:

Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades opticas - Otras propiedades - Recomendación para procesamiento Moldeo por inyección

Any use of this information falls under the rules of our disclaimer.

Caracteristicas de procesamiento y fisicas

Valor

Unidades

Método de ensayo

ISO Data

Indice de fluidez volumétrico, MVR

cm³/10min

ISO 1133

Temperatura

230

°C

Carga

2.16

Índice de fluidez, MFI

g/10min

ISO 1133

Temperatura

230

°C

Carga

2.16

Propiedades mecánicas

Valor

Unidades

Método de ensayo

ISO Data

Módulo de tracción

2300

MPa

ISO 527

Esfuerzo de tracción

MPa

ISO 527

Alargamiento a rotura

130

ISO 527

Módulo de flexión, 23°C

2100

MPa

ISO 178

Resistencia a la flexión

MPa

ISO 178

Resistencia al impacto Charpy, +23°C

kJ/m²

ISO 179/1eU

Resistencia al impacto Charpy c/entalla, +23°C

kJ/m²

ISO 179/1eA

Propiedades térmicas

Valor

Unidades

Método de ensayo

ISO Data

Estabilidad al calor, 1.80 MPa

°C

ISO 75-1/-2

Estabilidad al calor, 0.45 MPa

°C

ISO 75-1/-2

Coef.de expansión térmica lineal, paralelo

E-6/K

ISO 11359-1/-2

Coef.de expansión térmica lineal, normal

E-6/K

ISO 11359-1/-2

Propiedades opticas

Valor

Unidades

Método de ensayo

ISO Data

Transmitancia luminosa

ISO 13468-1, -2

Otras propiedades	Valor	Unidades	Método de ensayo
Densidad	1310	kg/m³	ISO 1183

Recomendación para procesamiento Moldeo por inyección	Valor	Unidades	Método de ensayo
Tiempo de pre-secado	5 - 7	h	-
Temperatura de la masa	230 - 250	°C	-
Temperatura del molde	60 - 80	°C	-
Temperatura - zona de alimentación	220 - 260	°C	-
Zona 1	220 - 260	°C	-
Temperatura de boquilla	220 - 260	°C	-
Velocidad de giro de husillo	50	rpm	-
Presión de inyección	50 - 95	MPa	-
Contrapresión	10	MPa	-

Características

Procesamiento y forma de entrega

Moldeo por inyección

Forma de suministro

Negro

Características especiales

Alto impacto o modificado al impacto, Transparente

Características

Light Guiding

Certifications

Contiene recursos renovables

Applicaciones

Automotriz, Electrica, Empacado, Equipos deportivos

Disponibilidad regional

Norteamérica, Europa, Asia Pacifico

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.