Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of DURAFIDE® 6465A62 - PPS-(GB+GF)60 - Polyplastics

Check here, which other Durafide datasheets, application examples or technical articles are available in Material Data Center

Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Otras propiedades - Funciones

Any use of this information falls under the rules of our disclaimer.

Propiedades mecánicas	Valor	Unidades	Método de ensayo
ISO Data
Esfuerzo de tracción	130	MPa	ISO 527
Alargamiento a rotura	1.3	%	ISO 527
Módulo de flexión, 23°C	15300	MPa	ISO 178
Resistencia a la flexión	200	MPa	ISO 178
Resistencia al impacto Charpy c/entalla, +23°C	5.5	kJ/m²	ISO 179/1eA
Dureza Rockwell	M 105	-	ISO 2039-2

Propiedades térmicas	Valor	Unidades	Método de ensayo
ISO Data
Estabilidad al calor, 1.80 MPa	270	°C	ISO 75-1/-2
Coef.de expansión térmica lineal, paralelo	20	E-6/K	ISO 11359-1/-2
Coef.de expansión térmica lineal, normal	30	E-6/K	ISO 11359-1/-2
Combustibilidad a espesor h	V-0	class	IEC 60695-11-10
Yellow Card disponible	sí	-	-

Propiedades eléctricas	Valor	Unidades	Método de ensayo
ISO Data
Constante dieléctrica, 1MHz	4.9	-	IEC 62631-2-1
Factor de pérdidas dieléctricas, 1MHz	10	E-4	IEC 62631-2-1
Resistividad volumétrica específica	3E14	Ohm*m	IEC 62631-3-1
Resistencia dieléctrica	16	kV/mm	IEC 60243-1
Indice comparativo de linea de fuga	125	-	IEC 60112
ASTM Data
Resistencia al arco	129	s	ASTM D 495

Otras propiedades	Valor	Unidades	Método de ensayo
Densidad	1870	kg/m³	ISO 1183

Funciones

Características

Características

High Gloss, Baja deformación

Disponibilidad regional

Asia Pacifico

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.