View Datasheet in other language

E-mail to a friend

Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of DURANEX® 3306 - (PBT+PET)-GF30 - Polyplastics

Material Data Center offers the following functions for DURANEX® 3306:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Duranex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:

Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Otras propiedades - Recomendación para procesamiento Moldeo por inyección

Any use of this information falls under the rules of our disclaimer.

Propiedades mecánicas

Valor

Unidades

Método de ensayo

ISO Data

Esfuerzo de tracción

140

MPa

ISO 527

Alargamiento a rotura

2.2

ISO 527

Módulo de flexión, 23°C

9100

MPa

ISO 178

Resistencia a la flexión

210

MPa

ISO 178

Resistencia al impacto Charpy c/entalla, +23°C

8.1

kJ/m²

ISO 179/1eA

Dureza Rockwell

M 100

ISO 2039-2

Propiedades térmicas

Valor

Unidades

Método de ensayo

ISO Data

Estabilidad al calor, 1.80 MPa

210

°C

ISO 75-1/-2

Coef.de expansión térmica lineal, paralelo

E-6/K

ISO 11359-1/-2

Coef.de expansión térmica lineal, normal

E-6/K

ISO 11359-1/-2

Combustibilidad a espesor h

class

IEC 60695-11-10

Yellow Card disponible

sí

Propiedades eléctricas

Valor

Unidades

Método de ensayo

ISO Data

Resistencia dieléctrica

kV/mm

IEC 60243-1

Indice comparativo de linea de fuga

350

IEC 60112

Otras propiedades	Valor	Unidades	Método de ensayo
Densidad	1540	kg/m³	ISO 1183

Recomendación para procesamiento Moldeo por inyección	Valor	Unidades	Método de ensayo
Temperatura del molde	70	°C	-
Zona 1	200	°C	-
Zona 2	230	°C	-
Zona 3	260	°C	-
Velocidad de inyección	67	mm/s	-

Características

Procesamiento y forma de entrega

Moldeo por inyección

Características

High Gloss

Disponibilidad regional

Asia Pacifico

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.