Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ecdel™ 9967 - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Ecdel™ 9967:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ecdel datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades opticas - Otras propiedades - Propiedades mecánicas (Film)
Any use of this information falls under the rules of our disclaimer.
Texto del producto

Ecdel™ 9967 elastomer meets ISO 10993 and/or USP Class VI biocompatibility requirement. Ecdel elastomers are plasticizer free copolyester elastomers (COPE) that offer clarity, toughness, flexibility, and chemical resistance for flexible packaging including medical and pharmaceutical applications. Ecdel 9967 may be

processed on standard injection molding, extrusion blow molding, profile extrusion, extrusion coating, or film extrusion equipment. Ecdel elastomers may be extrusion blow molded directly into bags or extruded into blown or cast film for later fabrication into bags. Ecdel elastomers are radiation, electron beam, ethylene oxide, and

autoclave sterilization stable. Ecdel 9967's high inherent viscosity may be helpful where good melt strength is required (blown film or profile extrusion).




Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ASTM Data
Índice de fluidez, MFI 12 g/10min ASTM D 1238
Temperatura 230 °C -
Carga 2.16 kg -
Propiedades mecánicasValorUnidadesMétodo de ensayo
ASTM Data
Módulo de tracción 170 MPa ASTM D 638
Esfuerzo de fluencia a tracción 13 MPa ASTM D 638
Esfuerzo de fractura a tracción 23 MPa ASTM D 638
Alargamiento a la fluencia 38 % ASTM D 638
Alargamiento a la rotura 400 % ASTM D 638
Módulo de flexión 150 MPa ASTM D 790
Dureza A Shore 95 - ASTM D 2240
Dureza D Shore 55 - ASTM D 2240
Resistencia al impacto Izod con entalla, baja temperatura 40 J/m ASTM D 256
Temperatura -40 °C -
Propiedades térmicasValorUnidadesMétodo de ensayo
ASTM Data
Coeficiente de dilatación térmica, long. 150 E-6/K ASTM D 696
Temperatura de fusión 205 °C ASTM D 3418
Temperatura de transición vítrea -40 °C ASTM E 1356
Temperatura Vicat 170 °C ASTM D 1525
Conductividad térmica, estado sólido 0.0274 W/(m K) ASTM C 177
Propiedades opticasValorUnidadesMétodo de ensayo
ASTM Data
Brillo 73 - ASTM D 2457
Opacidad 1 % ASTM D 1003
Transmitancia luminosa 94 % ASTM D 1003
Índice de refracción 1.51 - ASTM D 542
Otras propiedadesValorUnidadesMétodo de ensayo
Absorción de agua, 24hr 0.4 % ASTM D 570
Densidad 1130 kg/m³ ASTM D 792
Propiedades mecánicas (Film)ValorUnidadesMétodo de ensayo
ASTM Data
Módulo de tracción, long. 197 MPa ASTM D 882
Módulo de tracción, normal 221 MPa ASTM D 882
Esfuerzo de fluencia a tracción, long. 11.2 MPa ASTM D 882
Esfuerzo de fractura a tracción, long. 41.5 MPa ASTM D 882
Esfuerzo de fractura a tracción, normal 18.1 MPa ASTM D 882
Alargamiento a la fluencia, long. 46 % ASTM D 882
Alargamiento a la fluencia, normal 20 % ASTM D 882
Alargamiento a la rotura, long. 330 % ASTM D 882
Alargamiento a la rotura, normal 550 % ASTM D 882
Espesor de la muestra 0.13 mm -
Características
Procesamiento y forma de entrega
Moldeo por inyección, Extrusión de película soplada, Extrusion del film, Extrusión de perfiles, Recubrimiento, Moldeo por soplado
Características especiales
Estable contra el calor, Transparente, Esterilizable, Esterilización por óxido de etileno (EtO), Esterilización por vapor, Gamma irradiation sterilization, Electron beam (e-beam) sterilization
Características
Copolímero
Resistencia quimica
Resistencia química general, Resistencia a la radiacion
Certifications
Grado médico, Biocompatibility ISO 10993, USP Class VI
Applicaciones
Médico, Empacado
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.