Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Elastollan® 590 A - (TPU-ARES) - BASF Polyurethanes GmbH

Check here, which other Elastollan datasheets, application examples or technical articles are available in Material Data Center

Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Otras propiedades - Condiciones de transformación - Funciones

Any use of this information falls under the rules of our disclaimer.

Texto del producto

DESCRIPTION
Elastollan 590 A is a polyester based TPU

SPECIAL PROPERTIES
good abrasion resistance

TYPICAL APPLICATIONS
roller tyres for conveyor systems and shopping trolleys, heel taps

OTHER HINTS
predrying: 2-3h at 100 bis 110°C,
max. content of humidity before processing: 0,02%
annealing: 20 h at 100°C in order to get optimum properties

CHEMICAL RESISTANCE
For detailed information on the chemical resistance of our
materials refer to this list of chemical resistance

Propiedades mecánicas	Valor	Unidades	Método de ensayo
ISO Data
Esfuerzo a 50% de alarg.	7	MPa	ISO 527
Alargamiento a rotura	>50	%	ISO 527
Tensión a 100% alargamiento	11	MPa	ISO 527
Tensión a 300% alargamiento	19	MPa	ISO 527
Resistencia a la tracción TPE	50	MPa	ISO 527
Alargamiento a rotura TPE	>300	%	ISO 527
Resistencia al desgarro	100	kN/m	ISO 34-1
Resistencia a la abrasión	35	mm³	ISO 4649
Dureza Shore A	94	-	ISO 7619-1
Dureza Shore D	39	-	ISO 7619-1

Propiedades térmicas	Valor	Unidades	Método de ensayo
ISO Data
Temp. de transición vítrea, 10°C/min	-16	°C	ISO 11357-1/-2

Propiedades eléctricas	Valor	Unidades	Método de ensayo
ISO Data
Indice comparativo de linea de fuga	600	-	IEC 60112

Otras propiedades	Valor	Unidades	Método de ensayo
Densidad	1250	kg/m³	ISO 1183

Condiciones de transformación	Valor	Unidades	Método de ensayo
ISO Data
Moldeo por inyección, temperatura de la masa	215	°C	ISO 294
Moldeo por inyección, temperatura del molde	60	°C	ISO 294

Funciones

Características

Procesamiento y forma de entrega

Moldeo por inyección

Forma de suministro

Sémola

Disponibilidad regional

Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa

Demás información

Moldeo por inyección

Barrel temperature : 200 - 215 °C
Melt temperature : 215 °C
Mold temperature: 25 - 40 °C

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.