Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Elastollan® R 2000 - (TPU-ARES)-GF - BASF Polyurethanes GmbH

Check here, which other Elastollan datasheets, application examples or technical articles are available in Material Data Center

Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Otras propiedades - Condiciones de transformación - Funciones

Any use of this information falls under the rules of our disclaimer.

Texto del producto

DESCRIPTION
Elastollan R 2000 is a glass fibre-reinforced TPU

SPECIAL PROPERTIES
very good impact strength, high stiffness combined with good
strain, low thermal expansion coefficient
equivalent to metal (Al), low mould shrinkage, ease of paintability

TYPICAL APPLICATIONS
technical parts, cabinets

OTHER HINTS
predrying: 2-3h at 100-120°C
(air circulating oven or dehumidified air dryer),
max. content of humidity before processing: 0,02%
annealing: 20 h at 100°C in order to get optimum properties

CHEMICAL RESISTANCE
For detailed information on the chemical resistance of our
materials refer to this list of chemical resistance

Propiedades mecánicas	Valor	Unidades	Método de ensayo
ISO Data
Módulo de tracción	2000	MPa	ISO 527
Resistencia a la tracción	65	MPa	ISO 527
Alargamiento a rotura	25	%	ISO 527
Resistencia al impacto Charpy, +23°C	140	kJ/m²	ISO 179/1eU
Resistencia al impacto Charpy, -30°C	110	kJ/m²	ISO 179/1eU
Resistencia al impacto Charpy c/entalla, +23°C	40	kJ/m²	ISO 179/1eA
Resistencia al impacto Charpy c/entalla, -30°C	10	kJ/m²	ISO 179/1eA
Resistencia a la tracción TPE	65	MPa	ISO 527
Alargamiento a rotura TPE	25	%	ISO 527
Dureza Shore D	67	-	ISO 7619-1

Propiedades térmicas	Valor	Unidades	Método de ensayo
ISO Data
Estabilidad al calor, 1.80 MPa	114	°C	ISO 75-1/-2
Estabilidad al calor, 0.45 MPa	147	°C	ISO 75-1/-2

Propiedades eléctricas	Valor	Unidades	Método de ensayo
ISO Data
Constante dieléctrica, 1MHz	5	-	IEC 62631-2-1
Factor de pérdidas dieléctricas, 100Hz	320	E-4	IEC 62631-2-1
Factor de pérdidas dieléctricas, 1MHz	560	E-4	IEC 62631-2-1
Resistividad volumétrica específica	1E11	Ohm*m	IEC 62631-3-1
Resistividad superficial específica	>1E15	Ohm	IEC 62631-3-2
Resistencia dieléctrica	37	kV/mm	IEC 60243-1
Indice comparativo de linea de fuga	600	-	IEC 60112

Otras propiedades	Valor	Unidades	Método de ensayo
Densidad	1370	kg/m³	ISO 1183

Condiciones de transformación	Valor	Unidades	Método de ensayo
ISO Data
Moldeo por inyección, temperatura de la masa	225	°C	ISO 294
Moldeo por inyección, temperatura del molde	60	°C	ISO 294

Funciones

Características

Procesamiento y forma de entrega

Moldeo por inyección

Forma de suministro

Sémola

Disponibilidad regional

Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa

Demás información

Moldeo por inyección

Barrel temperature : 210 - 225 °C
Melt temperature : 225 °C
Mold temperature: 25 - 70 °C

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.