View Datasheet in other language

E-mail to a friend

Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Greenflex® FD 23 - EVAC - Versalis S.p.A

Material Data Center offers the following functions for Greenflex® FD 23:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Greenflex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:

Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades opticas - Propiedades mecánicas (Film)

Any use of this information falls under the rules of our disclaimer.

Caracteristicas de procesamiento y fisicas

Valor

Unidades

Método de ensayo

ISO Data

Índice de fluidez, MFI

0.5

g/10min

ISO 1133

Temperatura

190

°C

Carga

2.16

Propiedades mecánicas

Valor

Unidades

Método de ensayo

ISO Data

Dureza Shore A

ISO 7619-1

Dureza Shore D

ISO 7619-1

Propiedades térmicas

Valor

Unidades

Método de ensayo

ISO Data

Temperatura de fusión, 10°C/min

104

°C

ISO 11357-1/-3

Coef.de expansión térmica lineal, paralelo

E-6/K

ISO 11359-1/-2

Propiedades opticas

Valor

Unidades

Método de ensayo

ISO Data

Brillo, 45°

ISO 2813

Niebla

ISO 14782

Propiedades mecánicas (Film)

Valor

Unidades

Método de ensayo

ISO Data

Tensión a fluencia, paralelo

4.5

MPa

ISO 527-3

Tensión a fluencia, normal

MPa

ISO 527-3

Resistencia a la tracción, normal

MPa

ISO 527-3

Alargamiento máximo, paralelo

450

ISO 527-3

Alargamiento máximo, normal

600

ISO 527-3

Coeficiente dinámico de fricción

0.5

ISO 8295

Tipo de extrusión

soplado

Espesor de la muestra

0.07

Características

Procesamiento y forma de entrega

Extrusión de película soplada

Forma de suministro

Sémola

Aditivos

Agente antibloqueo

Características especiales

Alto impacto o modificado al impacto

Características

Copolímero

Applicaciones

Empacado, Refrigeración

Disponibilidad regional

Europa, Próximo Oriente/Africa

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.