Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of HOSTAFORM® MT®24F01 - POM - Celanese

Material Data Center offers the following functions for HOSTAFORM® MT®24F01:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Hostaform datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Indice de fluidez volumétrico, MVR 21 cm³/10min ISO 1133
Temperatura 190 °C -
Carga 2.16 kg -
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 2600 MPa ISO 527
Esfuerzo de fluencia 58 MPa ISO 527
Alarg. en límite elástico 8 % ISO 527
Alarg. nominal a rotura 25 % ISO 527
Resistencia al impacto Charpy, +23°C 80 kJ/m² ISO 179/1eU
Resistencia al impacto Charpy c/entalla, +23°C 4 kJ/m² ISO 179/1eA
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Estabilidad al calor, 1.80 MPa 100 °C ISO 75-1/-2
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1440 kg/m³ ISO 1183
Funciones
Esfuerzo-alargamiento , HOSTAFORM® MT®24F01, POM, Celanese
Módulo secante-alargamiento , HOSTAFORM® MT®24F01, POM, Celanese
Características
Procesamiento y forma de entrega
Moldeo por inyección
Forma de suministro
Sémola
Aditivos
Lubricante, Desmoldeante
Características especiales
Esterilizable, Esterilización por óxido de etileno (EtO), Esterilización por vapor
Características
Copolímero
Certifications
Contacto con alimentos, Aprobación a contacto con alimentos BfR, Aprobado por el FDA 21 CFR, Grado médico, Biocompatibility ISO 10993, USP Class VI, Drug Master File, Device Master File
Applicaciones
Médico
Disponibilidad regional
Norteamérica, Europa, América del Sur y Centroaméric, Próximo Oriente/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.