Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Inzea® F19 - (PLA+PSAC) - Nurel S.A.

Material Data Center offers the following functions for Inzea® F19:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Inzea datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades opticas - Otras propiedades - Propiedades mecánicas (Film)
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Indice de fluidez volumétrico, MVR 7 cm³/10min ISO 1133
Temperatura 190 °C -
Carga 2.16 kg -
Propiedades opticasValorUnidadesMétodo de ensayo
ASTM Data
Opacidad 5 % ASTM D 1003
Otras propiedadesValorUnidadesMétodo de ensayo
Biobased content 85 % -
Moisture Content 0.5 % -
Propiedades mecánicas (Film)ValorUnidadesMétodo de ensayo
ISO Data
Módulo de tracción, paralelo 2900 MPa ISO 527-3
Tensión a fluencia, paralelo 55 MPa ISO 527-3
Alargamiento a fluencia, paralelo 3 % ISO 527-3
Resistencia a la tracción, paralelo 55 MPa ISO 527-3
Alargamiento máximo, paralelo 60 % ISO 527-3
Resistencia al desgarro Trouser, parallel 6.5 N/mm ISO 6383-1
Espesor de la muestra 0.02 mm -
Características
Procesamiento y forma de entrega
Extrusión de película soplada, Extrusion del film
Características especiales
Transparente
Certifications
Contiene recursos renovables, Biodegradables, Contacto con alimentos, Aprobación a contacto con alimentos 10/2011, Compostable ISO 13432 (Productor), Compostable ISO 13432 (Certificado)
Disponibilidad regional
Europa, América del Sur y Centroaméric
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.