Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LAPEROS™ E130G - LCP-GF30 - Polyplastics

Material Data Center offers the following functions for LAPEROS™ E130G:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Laperos datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Módulo de flexión, 23°C 12000 MPa ISO 178
Resistencia a la flexión 170 MPa ISO 178
Resistencia al impacto Charpy c/entalla, +23°C 35 kJ/m² ISO 179/1eA
Dureza Rockwell M 65 - ISO 2039-2
ASTM Data
Esfuerzo de tracción 170 MPa ASTM D 638
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Estabilidad al calor, 1.80 MPa 245 °C ISO 75-1/-2
Estabilidad al calor, 0.45 MPa 270 °C ISO 75-1/-2
Combustibilidad a espesor h V-0 class IEC 60695-11-10
Yellow Card disponible sí - -
Propiedades eléctricasValorUnidadesMétodo de ensayo
ISO Data
Constante dieléctrica, 1MHz 3.8 - IEC 62631-2-1
Factor de pérdidas dieléctricas, 1MHz 300 E-4 IEC 62631-2-1
Resistividad volumétrica específica 6E13 Ohm*m IEC 62631-3-1
Resistencia dieléctrica 44 kV/mm IEC 60243-1
Indice comparativo de linea de fuga 125 - IEC 60112
ASTM Data
Resistencia al arco 144 s ASTM D 495
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1610 kg/m³ ISO 1183
Características
Características especiales
Resistencia mejorada al fuego
Disponibilidad regional
Asia Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.