Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEONA™ 14G43 - PA66-GF43 - Asahi Kasei

Material Data Center offers the following functions for LEONA™ 14G43:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Leona datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propiedades mecánicas - Propiedades térmicas - Otras propiedades - Recomendación para procesamiento Moldeo por inyección
Any use of this information falls under the rules of our disclaimer.
Propiedades mecánicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 14900 / 11500 MPa ISO 527
Resistencia a la tracción 221 / 160 MPa ISO 527
Alargamiento a rotura 2 / 4 % ISO 527
Módulo de flexión, 23°C 13100 / 10600 MPa ISO 178
Resistencia a la flexión 352 / 261 MPa ISO 178
Resistencia al impacto Charpy, +23°C N / 101 kJ/m² ISO 179/1eU
Resistencia al impacto Charpy c/entalla, +23°C 14 / 20 kJ/m² ISO 179/1eA
Dureza Rockwell R 118 - ISO 2039-2
ASTM Data
Esfuerzo de tracción 230 / 160 MPa ASTM D 638
Alargamiento a la rotura 2.5 / 4 % ASTM D 638
Módulo de flexión 13000 / 9500 MPa ASTM D 790
Resistencia a la flexión 360 / 250 MPa ASTM D 790
Dureza Rockwell M 95 / M 80 - ASTM D 785
Resistencia al impacto Izod con entalla, 1/8 in 140 / - J/m ASTM D 256
Propiedades térmicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Estabilidad al calor, 1.80 MPa 255 / * °C ISO 75-1/-2
Estabilidad al calor, 0.45 MPa 260 / * °C ISO 75-1/-2
ASTM Data
Combustibilidad UL 94 HB - UL 94
Espesores de probeta 0.75 mm -
Coeficiente de dilatación térmica, long. 20 E-6/K ASTM D 696
Estabilidad al calor @ 66 psi 260 °C ASTM D 648
Estabilidad al calor @ 264 psi 250 °C ASTM D 648
Otras propiedadesSeco / CondUnidadesMétodo de ensayo
Absorción de humedad 1.4 / * % Sim. to ISO 62
Densidad 1500 / - kg/m³ ISO 1183
Densidad 1500 kg/m³ ASTM D 792
Recomendación para procesamiento Moldeo por inyecciónValorUnidadesMétodo de ensayo
Temperatura de pre-secado 80 - 90 °C -
Tiempo de pre-secado 2 - 3 h -
Temperatura de la masa 275 - 295 °C -
Temperatura del molde 75 - 85 °C -
Características
Procesamiento y forma de entrega
Moldeo por inyección
Forma de suministro
Sémola
Características especiales
Estable contra el calor
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.