View Datasheet in other language

E-mail to a friend

Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LUTENE-H BE0350 - (PE-HD) - LG Chem

Material Data Center offers the following functions for LUTENE-H BE0350:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Lutene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:

Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Otras propiedades - Recomendación para procesamiento Extrusión

Any use of this information falls under the rules of our disclaimer.

Caracteristicas de procesamiento y fisicas

Valor

Unidades

Método de ensayo

ASTM Data

Índice de fluidez, MFI

0.25

g/10min

ASTM D 1238

Temperatura

190

°C

Carga

2.16

Propiedades mecánicas

Valor

Unidades

Método de ensayo

ASTM Data

Esfuerzo de fluencia a tracción

29.6

MPa

ASTM D 638

Alargamiento a la rotura

800

ASTM D 638

Módulo de flexión

1135

MPa

ASTM D 790

Dureza D Shore

ASTM D 2240

Resistencia al impacto Izod con entalla, 1/4 in

441

J/m

ASTM D 256

Propiedades térmicas

Valor

Unidades

Método de ensayo

ASTM Data

Coeficiente de dilatación térmica, long.

175

E-6/K

ASTM D 696

Estabilidad al calor @ 66 psi

°C

ASTM D 648

Temperatura de fusión

130

°C

ASTM D 3418

Temperatura Vicat

130

°C

ASTM D 1525

Otras propiedades	Valor	Unidades	Método de ensayo
Densidad	958	kg/m³	ASTM D 792

Recomendación para procesamiento Extrusión	Valor	Unidades	Método de ensayo
Type of extrusion	blown	-	-
Temperatura de la masa	180 - 200	°C	-
Temperatura del molde	6 - 40	°C	-
Zona 1	160 - 200	°C	-

Características

Procesamiento y forma de entrega

Moldeo por soplado

Características especiales

Alto impacto o modificado al impacto

Disponibilidad regional

Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.