Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Meytel E66 - PA66 - Mepol S.r.l.

Material Data Center offers the following functions for Meytel E66:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Meytel datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Contracción posterior al moldeo, paralelo 0.9 / * % ISO 294-4, 2577
Propiedades mecánicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 3200 / 1200 MPa ISO 527
Esfuerzo de fluencia 85 / 50 MPa ISO 527
Alarg. en límite elástico 5 / - % ISO 527
Alargamiento a rotura >50 / >50 % ISO 527
Módulo de flexión, 23°C 3100 / 1100 MPa ISO 178
Resistencia al impacto Izod con entalla, +23°C 5.5 / 25 kJ/m² ISO 180/1A
Resistencia al impacto Izod con entalla 6 / - kJ/m² ISO 180/1A
Temperatura 0 °C -
Propiedades térmicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Temperatura de fusión, 10°C/min 264 / * °C ISO 11357-1/-3
Estabilidad al calor, 1.80 MPa 75 / * °C ISO 75-1/-2
Estabilidad al calor, 0.45 MPa 220 / * °C ISO 75-1/-2
Temp. reblandecimiento Vicat, B 240 / * °C ISO 306
Otras propiedadesSeco / CondUnidadesMétodo de ensayo
Absorción de agua 9 / * % Sim. to ISO 62
Densidad 1140 / - kg/m³ ISO 1183
Características
Aditivos
Lubricante
Características especiales
Estable contra rayos U.V./interperie, Estable contra el calor
Características
Nucleado
Applicaciones
Uso general
Disponibilidad regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.