Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Nemcon™ E PP AS - PP - Ovation Polymers

Material Data Center offers the following functions for Nemcon™ E PP AS:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Nemcon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propiedades mecánicas - Propiedades eléctricas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Propiedades mecánicasValorUnidadesMétodo de ensayo
ASTM Data
Módulo de tracción 740 MPa ASTM D 638
Esfuerzo de fluencia a tracción 22 MPa ASTM D 638
Alargamiento a la rotura 170 % ASTM D 638
Módulo de flexión 525 MPa ASTM D 790
Resistencia al impacto Izod con entalla, 1/8 in 93.4 J/m ASTM D 256
Propiedades eléctricasValorUnidadesMétodo de ensayo
ASTM Data
Resistividad superficial 3E11 Ohm ASTM D 257
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 920 kg/m³ ASTM D 792
Características
Características especiales
Antiestático
Applicaciones
Electrica
Disponibilidad regional
Norteamérica
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.