Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of P84®NT2 HCM - PI - Evonik Operations GmbH

Material Data Center offers the following functions for P84®NT2 HCM:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other P84 datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Texto del producto

Neat aromatic Polyimide

Polyimid P84® NT - at a glance

 

  • Excellent performance at high temperatures
  • High strength and excellent shape stability
  • Very good impact resistance
  • High heat deflection temperature
  • Very good creep resistance even at elevated temperatures
  • Machinable with standard tools
  • Low wear and friction behaviour
  • Processing by Hot compression molding

 

 

Application examples

bushings, seals, bearings components, guides, gear wheels, and valve parts

in the automotive and aerospace industries and in industrial equipment.

For further information please visit WWW.P84.COM.

Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 3428 MPa ISO 527
Resistencia a la tracción 132 MPa ISO 527
Alargamiento a rotura 6.3 % ISO 527
Resistencia al impacto Charpy, +23°C 133 kJ/m² ISO 179/1eU
Type of failure C - -
Resistencia al impacto Charpy c/entalla, +23°C 7.5 kJ/m² ISO 179/1eA
Type of failure C - -
Dureza Shore D 88 - ISO 7619-1
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Temp. de transición vítrea, 10°C/min 364 °C ISO 11357-1/-2
Estabilidad al calor, 1.80 MPa 340 °C ISO 75-1/-2
Estabilidad al calor, 0.45 MPa 377 °C ISO 75-1/-2
Coef.de expansión térmica lineal, paralelo 36 E-6/K ISO 11359-1/-2
Propiedades eléctricasValorUnidadesMétodo de ensayo
ISO Data
Resistividad volumétrica específica >1E13 Ohm*m IEC 62631-3-1
Resistividad superficial específica >1E15 Ohm IEC 62631-3-2
Resistencia dieléctrica 37 kV/mm IEC 60243-1
Indice comparativo de linea de fuga 125 - IEC 60112
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1380 kg/m³ ISO 1183
Características
Procesamiento y forma de entrega
Moldeo por compresión
Forma de suministro
Sémola, Granulado, Polvo
Características especiales
Alto impacto o modificado al impacto, Estable contra el calor
Características
Resistencia a la fluencia, Grado tribológico
Applicaciones
Avión y aeroespacial, Automotriz
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.