Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
This is the free Material Data Center Datasheet of Platamid® H 2519 Pellets - PA* - ARKEMA
unit conversion, PDF datasheet print, comparison with other plastics
Check here, which other Platamid datasheets, application examples or technical articles are available in Material Data Center
Platamid® H 2519 is a thermoplastic co-polyamide hot melt adhesive available in pellet form. This medium melt viscosity, fast re-crystallizing grade is particularly suitable for manufacturing webs, nets, mono- and multi-filaments, and films by extrusion.
Platamid® H 2519 offers a very good adhesion to various polar substrates (thermoplastics, thermosets, metal, natural fibers, etc). In addition, Platamid® H 2519 also exhibits strong adhesion onto rigid and plasticized PVC as well as ABS, epoxy resin, PU, etc. Dense layers of Platamid® H 2519 are known to have barrier properties against PVC plasticizer migration.
Platamid® H 2519 is also characterized by a high content of Bio Based Carbon (50% according ASTM D6866), making it a bio based solution to difficult-to-solve bonding problems.
AVAILABLE GRADES
This product is available:
- Un-dried (H 2519 F)
PACKAGING
- Platamid® H 2519 T is delivered in 25 kg sealed bags.
- Platamid® H 2519 F is delivered in 25 kg sealed bags, 500 kg sealed big bags (GRVS or GRVS ALU) and 500 kg sealed rigid containers (GRVC).
Two years from the date of delivery. For any use above this limit, please refer to our technical services.
RENEWABLE CARBON CONTENT
Caracteristicas de procesamiento y fisicas | Seco / Cond | Unidades | Método de ensayo | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISO Data | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Indice de fluidez volumétrico, MVR | 8 / * | cm³/10min | ISO 1133 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Temperatura | 160 / * | °C | - | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Carga | 2.16 / * | kg | - |
Otras propiedades | Seco / Cond | Unidades | Método de ensayo |
Densidad | 1090 / - | kg/m³ | ISO 1183 |
Biobased content | 50 | % | - |
Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.
Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.