Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Tecomid® NB40 GR20 NL - PA6-GF20 - Eurotec Mühendislik Plastikleri

Material Data Center offers the following functions for Tecomid® NB40 GR20 NL:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Tecomid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Otras propiedades - Recomendación para procesamiento Moldeo por inyección
Any use of this information falls under the rules of our disclaimer.
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 7000 MPa ISO 527
Resistencia a la tracción 145 MPa ISO 527
Alargamiento a rotura 3.5 % ISO 527
Resistencia al impacto Izod, +23°C 60 kJ/m² ISO 180/1U
Resistencia al impacto Izod con entalla, +23°C 10 kJ/m² ISO 180/1A
Resistencia al impacto Izod con entalla 9 kJ/m² ISO 180/1A
Temperatura -30 °C -
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Temperatura de fusión, 10°C/min 223 °C ISO 11357-1/-3
Estabilidad al calor, 1.80 MPa 205 °C ISO 75-1/-2
Estabilidad al calor, 0.45 MPa 215 °C ISO 75-1/-2
Temp. reblandecimiento Vicat, B 210 °C ISO 306
Combustibilidad a 1.5mm esp. nom. HB class IEC 60695-11-10
Espesores de probeta 1.6 mm -
Combustibilidad a espesor h HB class IEC 60695-11-10
Espesores de probeta 0.8 mm -
Propiedades eléctricasValorUnidadesMétodo de ensayo
ISO Data
Resistividad volumétrica específica 1E13 Ohm*m IEC 62631-3-1
Resistividad superficial específica 1E13 Ohm IEC 62631-3-2
Indice comparativo de linea de fuga 500 - IEC 60112
Otras propiedadesValorUnidadesMétodo de ensayo
Absorción de humedad 2.4 % Sim. to ISO 62
Densidad 1270 kg/m³ ISO 1183
Moisture Content 0.2 % -
Recomendación para procesamiento Moldeo por inyecciónValorUnidadesMétodo de ensayo
Temperatura de pre-secado 80 °C -
Tiempo de pre-secado 2 - 4 h -
Temperatura de la masa 250 - 270 °C -
Temperatura del molde 60 - 100 °C -
Temperatura - zona de alimentación 60 - 80 °C -
Presión de mantenimiento 50 - 100 MPa -
Características
Procesamiento y forma de entrega
Moldeo por inyección
Forma de suministro
Color natural
Disponibilidad regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.