Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TIPELIN 7100S - (PE-HD) - MOL Petrochemicals Co. Ltd.

Material Data Center offers the following functions for TIPELIN 7100S:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Tipelin datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Otras propiedades - Recomendación para procesamiento Extrusión
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Índice de fluidez, MFI 0.12 g/10min ISO 1133
Temperatura 190 °C -
Carga 2.16 kg -
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Esfuerzo de fluencia 27 MPa ISO 527
Alarg. en límite elástico 12 % ISO 527
Resistencia a la tracción 28 MPa ISO 527
Alargamiento a rotura 1500 % ISO 527
Módulo de flexión, 23°C 1100 MPa ISO 178
Resistencia al impacto Izod con entalla, +23°C 15 kJ/m² ISO 180/1A
Dureza Shore D 63 - ISO 7619-1
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Temp. reblandecimiento Vicat, A 126 °C ISO 306
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 949 kg/m³ ISO 1183
Recomendación para procesamiento ExtrusiónValorUnidadesMétodo de ensayo
Temperatura de la masa 190 - 210 °C -
Características
Procesamiento y forma de entrega
Extrusión de tubería, Extrusión de láminas, Moldeo por soplado
Forma de suministro
Sémola
Características
Copolímero, Copolímero de buteno
Resistencia quimica
Resistencia al ácido, Resistencia al esfuerzo producido por condiciones ambientales, Resistencia a la oxidación
Certifications
Contacto con alimentos, Aprovação de alimentos 1935/2004/EG, Aprobación a contacto con alimentos 10/2011, Aprobado por el FDA 21 CFR, Contacto con agua potable, Contacto con agua potable KTW, RoHS
Applicaciones
Electrica, Empacado, Juguetes
Disponibilidad regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.